Alcasczar Posted February 4, 2019 Share Posted February 4, 2019 I have this case now with the Hydro H150I Pro 360mm, I have 6 fans I want to use up front with this in push pull. I'd like to compare this to normal push Do I need to remove the front glass? I am not seeing how I am supposed to mount the front fans to the case or bracket. Am I missing something? does it need a special case bracket for push pull that I need to order from Corsair? Looked at the bracket and can install it as push. I've setup other coolers though on the top of the case but this one has me a little perplexed :D Anyone have a guide on this? I looked around for a bit before posting but do not see one. Many thanks Link to comment Share on other sites More sharing options...
Zotty Posted February 4, 2019 Share Posted February 4, 2019 hey buddy.. you can remove the front fan tray completely to fit the fans/rad.. look for 2 thumb screws just inside the front edge... and here is a 570x set up guide for wiring etc.. http://forum.corsair.com/v3/showthread.php?t=182609 and my RGB FAQ http://forum.corsair.com/v3/showthread.php?t=173880 Link to comment Share on other sites More sharing options...
Alcasczar Posted February 4, 2019 Author Share Posted February 4, 2019 Thanks, I saw that post actually. What I am curious about is it looks like you mount fans to rad then you remove front fan bracket and mount bracket on top of the front fans? how ? the holes in the fans are used by long screws to hold it to rad or is there special fans I need? Link to comment Share on other sites More sharing options...
telias82 Posted February 4, 2019 Share Posted February 4, 2019 Thanks, I saw that post actually. What I am curious about is it looks like you mount fans to rad then you remove front fan bracket and mount bracket on top of the front fans? how ? the holes in the fans are used by long screws to hold it to rad or is there special fans I need? Hello fello rochesterian :) the way I was planning to do it, you dont need to do anything special. I currently have my mounting bracket on top of the fans, then the long screws connecting both to the rad. then you just do the long screws from the back. i'm using LL120's all around. Link to comment Share on other sites More sharing options...
Zotty Posted February 4, 2019 Share Posted February 4, 2019 indeed.. you use the long screws,, they go through the fan tray then through the fan and into the Radiator.... Link to comment Share on other sites More sharing options...
Zotty Posted February 4, 2019 Share Posted February 4, 2019 http://i.imgur.com/VjlUkL0l.png Link to comment Share on other sites More sharing options...
Zotty Posted February 4, 2019 Share Posted February 4, 2019 http://i.imgur.com/qE0acLhl.png Link to comment Share on other sites More sharing options...
Zotty Posted February 4, 2019 Share Posted February 4, 2019 hope those make sense bud Link to comment Share on other sites More sharing options...
Alcasczar Posted February 4, 2019 Author Share Posted February 4, 2019 Hoo RAH, exactly the information I was hoping for, many thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.