Timecode Posted August 25, 2020 Share Posted August 25, 2020 I have a 220T case with a h100i pump I noticed to do a top install of the Radiator was not going to allow me to have my current RAM installed ( vengenace rgb) due to it being to tall. Im trying to know what RAM i could look at buying to allow me to mount the Rad to top. I would really prefer it being to top. Does anyone know the specs left over with this Case and Pump I have been looking around I read somewhere it should be 34mm max? can anyone confirm as Im rather anxious incase i Buy more RAM and find i cannot fit it :bigeyes: On that note I would like any suggestions you may have on what RAM modules to get! Link to comment Share on other sites More sharing options...
emissary42 Posted August 27, 2020 Share Posted August 27, 2020 Don't know the clearance of your case/AIO combo, but if you don't need RGB memory Vengeance LPX are probably your best bet, when it comes to low profile Corsair memory. Their height is just 31mm according to several online sources. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair CJ Posted September 2, 2020 Corsair Employee Share Posted September 2, 2020 That sounds like a really tight build. If I recall correctly Vengeance LPX might be just the ticket. That said, have you considered simply installing your radiator in the front fan mounts of your case rather than the top? Link to comment Share on other sites More sharing options...
Recommended Posts