tonytastey Posted December 6, 2019 Share Posted December 6, 2019 I have the ML 120 PRO RGB fan 3 pack and an H100i RGB Platinum cooler (2x ML 120 fans). What else do I need beyond the stuff in the boxes (Lighting Node Pro and RGB Hub) to be able to control the RPMs on all 5 fans in iCUE? This is the diagram from the megathread is the one that looks closest to my setup, but it looks like I may still need to buy: Carbide 678C 6-port PWM RepeaterPWM "Y" Splitter Is this accurate or is my particular fan/cooler combo and box inclusions much different than the diagram? Will those two things work or do I need to spring for the Commander Pro? Link to comment Share on other sites More sharing options...
Killswitchin Posted December 6, 2019 Share Posted December 6, 2019 the hardware that comes in the box is for RGB only, to control the fans you could have the 3 in the box connect up to your motherboards fan headers or you could go with a commander pro or the controller in the diagram. I would recommend that you let your AIO control the fans that come with it Link to comment Share on other sites More sharing options...
Recommended Posts