The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cooling


Thread Tools Search this Thread Rate Thread Display Modes
Old 08-11-2018, 09:08 AM
Drinkmelk Drinkmelk is offline
Registered User
Drinkmelk's PC Specs
Join Date: Aug 2018
Posts: 2
POST ID # = 968086
Drinkmelk Reputation: 10
Default 6x ML120 connected to h150i pump

Hey guys, I've got my h150i on the way and im looking to install it into my new spec omega rgb, but wanted some rgb fans on it. Im looking to get a 3 pack of rgb ML120's and plan to do a push/pull setup up with all 6 fans. Im wondering if its safe to connect all 6 fans to the pump by adding some pwm splitters to the pump fan cables?
Reply With Quote

Old 08-11-2018, 09:32 AM
c-attack c-attack is offline
Registered User
c-attack's PC Specs
Join Date: Jun 2014
Posts: 11,742
POST ID # = 968091
c-attack c-attack Reputation: 122

With the lighting current moved over to the RGB Lighting Hub and its separate SATA power line, the fan itself draws very little current --- about 0.08A per fan. Total SATA power limit for the entire cooler is 2.0A, so even reserving a large chunk for the pump and lighting, you are nowhere close to that. There should be no issue with using either 2 x 3-way splitters or 3 x 2-way splitters on the pump controller.

You can also use more HD120 fan if you want to keep them all the same. It isn't going to matter from a cooling perspective.

Last edited by c-attack; 08-11-2018 at 09:34 AM.
Reply With Quote

Old 08-11-2018, 05:27 PM
Drinkmelk Drinkmelk is offline
Registered User
Drinkmelk's PC Specs
Join Date: Aug 2018
Posts: 2
POST ID # = 968141
Drinkmelk Reputation: 10

Perfect thanks. The only reason I'm going for ml's is because I've found a really good deal on them, otherwise yeah I would've liked hd's.
Reply With Quote

Old 08-11-2018, 08:45 PM
Krokarn Krokarn is offline
Registered User
Krokarn's PC Specs
Join Date: Aug 2015
Location: Sweden
Posts: 232
POST ID # = 968158
Krokarn Reputation: 10

But, there is not space in the case for push/pull with 6 fans. I have just rebuild my sons pc with new SPEC OMEGA RGB case and one H150i and there is no space on the bottom fan, on the upper and the middle you can have push/pull. If you remove the plastic cover and the hdd-cage then you got space for push/pull on all 3 places on the 150i.
Reply With Quote


h150i pro, ml120 pro, pwm fans

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 09:18 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.