Bashiron Posted March 8, 2017 Share Posted March 8, 2017 Hello I just got me a K70 LUX RGB When i activate "Type ligting (Ripple)" Then my right SHIFT blinks like crazy, i it's on autofire. And my key Y+H+B+6 keys makes more than 1 letter. When i deactivate ripple, the keyboard works normal. I have tryed to reinstall CUE 2,10,71 Firmware 2,05. I have not made any macros. allmost a newly installed win 10 Have tryed with advanced mode, but same same. Any good ideas ? :) BashironBashiron ripple effect profile.cueprofile Link to comment Share on other sites More sharing options...
Comet 1626864951 Posted March 10, 2017 Share Posted March 10, 2017 Try attaching the problematic CUE profile to your message, so everyone can take a look. Link to comment Share on other sites More sharing options...
Bashiron Posted March 10, 2017 Author Share Posted March 10, 2017 Now the profile is there Link to comment Share on other sites More sharing options...
Comet 1626864951 Posted March 13, 2017 Share Posted March 13, 2017 Somebody with your model keyboard should hopefully respond to this thread. Importing your profile to my K95 RGB, I see that basic mode's ripple looks okay. Advanced mode lacks a ripple effect, so I added one, and it seems okay also. Check your own view of your Advanced Mode profile, to make sure you have defined the ripple as the topmost lighting action, and all keys are selected, and the options "start on key press", "stop after 1 time", "play from pressed key" are active, as seen in the following picture: Link to comment Share on other sites More sharing options...
Bashiron Posted March 13, 2017 Author Share Posted March 13, 2017 thx for the tip Now i have tryed on another pc, my friends pc, he has a k70 rgb to. Same problem with my keyboard, and my keyboard still ****es up :/ sooo i gues a keyboard error. :( just weird it's only when ripple is active. Link to comment Share on other sites More sharing options...
Inheritance Posted March 14, 2017 Share Posted March 14, 2017 Contact Corsair Support and ask for a head firmware reset. If that does not work you will need to RMA the unit Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.