AP1916 Posted May 31, 2019 Share Posted May 31, 2019 The available gpu block compatability is.... Underwhelming and disappointing to put it mildly.... Are there any plans to expand the gpu block variety? Waited so long for hydro x only to probably just not use it anyway. Link to comment Share on other sites More sharing options...
charbel1011 Posted May 31, 2019 Share Posted May 31, 2019 One of the corsair employees told me they gonna be more available as soon as the hydro x settles down a little bit. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair GregX Posted May 31, 2019 Corsair Employee Share Posted May 31, 2019 Besides active. Supported are also ASUS 2080 Strix and ASUS 2080 Ti Strix At this moment, can't confirm upcoming support for other graphics card models. Link to comment Share on other sites More sharing options...
Ryuokie Posted June 3, 2019 Share Posted June 3, 2019 Will a GTX 1080 FE be compatible with your GPU waterblocks? Link to comment Share on other sites More sharing options...
Corsair Employee Corsair GregX Posted June 3, 2019 Corsair Employee Share Posted June 3, 2019 Yes, GTX 1080 FE is compatible with the Hydro X Series XG7 RGB 10-SERIES GPU Water Block (1080 Ti FE). Link to comment Share on other sites More sharing options...
fing Posted June 10, 2019 Share Posted June 10, 2019 can i use your Hydro X Series XG7 RGB 10 SERIES GPU Water Block (1080 Ti FE) for my gigabyte of gtx 1080 g1? or does one come at a time? sends in to Denmark? Link to comment Share on other sites More sharing options...
DevBiker Posted June 10, 2019 Share Posted June 10, 2019 You can check compatibility here: https://www.corsair.com/us/en/Categories/Products/Custom-Cooling/Blocks/GPU-Blocks/Hydro-X-Series-XG7-RGB-10-SERIES-GPU-Water-Block-%281080-Ti-FE%29/p/CX-9020001-WW#tab-gpu-compatibility. Based on what you've specified (Gigabyte GeForce GTX 1080 G1 Gaming), it is not compatible. Link to comment Share on other sites More sharing options...
Antixs Posted June 11, 2019 Share Posted June 11, 2019 Shame I was checking out only to find out 2080 Ti trio not supported would have purchased full setup :( Link to comment Share on other sites More sharing options...
c-attack Posted June 11, 2019 Share Posted June 11, 2019 Shame I was checking out only to find out 2080 Ti trio not supported would have purchased full setup :( All of the custom PCBs require a unique water block to fit. This is the downside to buying a card designed for enhanced air cooling, then later trying to turn it into a water cooled model. Link to comment Share on other sites More sharing options...
romrommm Posted June 22, 2019 Share Posted June 22, 2019 Please make a waterblock gpu compatible with the Evga 1080ti ftw3 Link to comment Share on other sites More sharing options...
GTXJackBauer Posted June 22, 2019 Share Posted June 22, 2019 (edited) A block that is usually compatible with the FE (reference design), should be compatible with most 3rd party AIBs reference designs as well unless things were changed on the WB to only fit particular AIB's custom designed FTW3s, Kingpins, HoFs, etc. Edited June 22, 2019 by GTXJackBauer Link to comment Share on other sites More sharing options...
romrommm Posted June 29, 2019 Share Posted June 29, 2019 is your gpu waterblock already compatible with the geforce rtx Super or will you release new waterblock gpu Link to comment Share on other sites More sharing options...
Deathtech Posted July 1, 2019 Share Posted July 1, 2019 EKWB has a block now for the Gigabyte Aorus RTX 2080 XTREME Would be awesome if this were to make its way to the corsair side. Link to comment Share on other sites More sharing options...
Cicirampa Posted July 16, 2019 Share Posted July 16, 2019 I read that my Evga rtx 2070 xc ultra have the same pcb (fe) as the 2080, can someone confirm?I wanna buy the hydro x gpu block :/ Link to comment Share on other sites More sharing options...
EnjoyMypc Posted August 7, 2019 Share Posted August 7, 2019 End of May it was announced that ASUS 2080 TI Strix will be supported. When it is expected to be available in stores/ Onlineshop’s? Link to comment Share on other sites More sharing options...
Corsair Employee Corsair GregX Posted August 9, 2019 Corsair Employee Share Posted August 9, 2019 is your gpu waterblock already compatible with the geforce rtx Super or will you release new waterblock gpu As of now, checked were many RTX SUPER variants. There are plenty compatible with our existing GPU water blocks. Please try the compatibility search option on XG7 GPU water blocks product page to search for specific models. EKWB has a block now for the Gigabyte Aorus RTX 2080 XTREME Would be awesome if this were to make its way to the corsair side. Sorry, there are no plans to support Gigabyte custom PCB models. I read that my Evga rtx 2070 xc ultra have the same pcb (fe) as the 2080, can someone confirm?I wanna buy the hydro x gpu block :/ Yes, EVGA GeForce RTX 2070 XC Ultra Gaming uses a PCB layout compatible with FE layout. XG7 RGB 20-SERIES GPU Water Block (2080 FE) will fit. End of May it was announced that ASUS 2080 TI Strix will be supported. When it is expected to be available in stores/ Onlineshop’s? XG7 RGB 20-SERIES GPU Water Block (2080 Ti Strix) is available in our webstore. Link to comment Share on other sites More sharing options...
waker Posted July 24, 2020 Share Posted July 24, 2020 Hello everyone. I'm still waiting for a waterblock compatible with my AORUS RTX 2080 TI Xtreme 11Gb... I am preparing a 680x and I am obliged to use an EK waterblock... it's still a shame... Link to comment Share on other sites More sharing options...
Recommended Posts