ilrobby Posted May 29, 2018 Share Posted May 29, 2018 Hello! I've a problem with a 2011-v3 socket on asus x99ws-ipmi mainboard. My previous mb was a 1151 socket and for that socket I'd bought a Enermax AIO kit that it had to be compatible also with 2011 sockets but, if I install this kit on new 2011-v3 socket, cpu goes to 85 Celsius in about 3 minutes..! This bacause the mounting system doesn't hold and keep squeezed the pump on the cpu/compound surface... seems there is about a millimetre between the pump plate and the cpu surface... Are the hydro h80i v2 really compatible with 2011-v3 sockets? Is the best single radiator cooler choice for this socket? Anyone had tried this combo? Many thanks, Roberto Link to comment Share on other sites More sharing options...
c-attack Posted May 30, 2018 Share Posted May 30, 2018 Make sure you are using the 2011/3 stand offs and not the ones for 115x. The 2011 is asymmetric and clearly shown in the installation instructions. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.