The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cases

Notices

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 12-18-2018, 01:33 PM
Kirinaka Kirinaka is offline
PC Enthusiast
Kirinaka's PC Specs
 
Join Date: Dec 2018
Location: Oregon
Posts: 4
POST ID # = 985976
Kirinaka Reputation: 10
Sad USB Over Current caused by Lighting Node Pro???

So I've had this PC for over 2 months now and have never had an overcurrent problem, I came home this morning and went for my usual gaming session and when it booted it kicked in to the overcurrent boot screen and shut off 15 seconds later. After testing around i found out it was the Lighting Node Pro that came installed inside the Carbide Spec Omega RBG I have, specifically the Connection from the NoPro to the USB on the Motherboard. After disconnecting it, my pc boots fine but I no longer have control over any of my rgb fans or case rgbs. I have 6 LL RGB fans and I was told that wouldnt be the reason it would overcurrent, any Ideas? Faulty NoPro? I dont believe so, I have had full control over everything up until today. Faulty MOBO usb port? Afraid not, tested it and it works perfectly.... Many thanks from a frustrated lover of corsair products....

Last edited by Kirinaka; 12-18-2018 at 03:04 PM.
Reply With Quote


  #2  
Old 12-19-2018, 08:12 PM
Corsair Caliente's Avatar
Corsair Caliente Corsair Caliente is offline
Corsair Employee
 
Join Date: May 2017
Posts: 183
POST ID # = 986165
Corsair Caliente Reputation: 15
Default

Hey there,

Sorry to hear about that. I suggest heading over to our support team at http://support.corsair.com and they should be able to help you out. Could be a faulty LNP.
Reply With Quote


  #3  
Old 12-21-2018, 03:43 PM
Kirinaka Kirinaka is offline
PC Enthusiast
Kirinaka's PC Specs
 
Join Date: Dec 2018
Location: Oregon
Posts: 4
POST ID # = 986476
Kirinaka Reputation: 10
Default

Quote:
Originally Posted by Corsair Caliente View Post
Hey there,

Sorry to hear about that. I suggest heading over to our support team at http://support.corsair.com and they should be able to help you out. Could be a faulty LNP.
So the one that came with the Carbide Spec Omega RGb isn’t specific to that case even though it says spec omega on it? And is there anyway if not spending a lot of money on the lnp light strips!
Reply With Quote


  #4  
Old 12-21-2018, 10:59 PM
DevBiker's Avatar
DevBiker DevBiker is offline
CORSAIR Beta Team
DevBiker's PC Specs
 
Join Date: Feb 2017
Location: Republic of Texas
Posts: 7,846
POST ID # = 986518
DevBiker Reputation: 88
Default

No, it is specific to the Spec Omega RGB ... well, at least the firmware is. But it's still, under the covers, a Lighting Node Pro.
__________________
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Helpful Links and FAQs:
AIO FAQ | RGB FAQ |
HydroX FAQ | RGB Cables |
iCUE Tips & Tricks

Reply With Quote


  #5  
Old 12-22-2018, 02:59 AM
Kirinaka Kirinaka is offline
PC Enthusiast
Kirinaka's PC Specs
 
Join Date: Dec 2018
Location: Oregon
Posts: 4
POST ID # = 986531
Kirinaka Reputation: 10
Default

Quote:
Originally Posted by DevBiker View Post
No, it is specific to the Spec Omega RGB ... well, at least the firmware is. But it's still, under the covers, a Lighting Node Pro.
So I cant purchase a standard LNP to replace it or I can? And if so can I buy one without the entire kit, just the LNP?

Last edited by Kirinaka; 12-23-2018 at 05:21 PM.
Reply With Quote


  #6  
Old 12-30-2018, 11:12 AM
Kirinaka Kirinaka is offline
PC Enthusiast
Kirinaka's PC Specs
 
Join Date: Dec 2018
Location: Oregon
Posts: 4
POST ID # = 987571
Kirinaka Reputation: 10
Default

Bummmpppppp
Reply With Quote


Reply

Tags
case, lighting node pro, over current

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:20 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.