teamsalty Posted August 11, 2017 Share Posted August 11, 2017 As the title reads. The RAM will not show up in the corsair link application and will not let me switch the lighting...it is constantly pulsing, even if the computer is hybernating. My H110i finally showed up after I hooked up the cable to the MB but the ram is not supposed to have a cable...it should show up in LINK after plugging it in. What could be the issue here? I tried re installing LINK and it still does not recognize it. I couldn't find any help online. I attached a screenshot of what LINK looks like. Link to comment Share on other sites More sharing options...
red-ray Posted August 11, 2017 Share Posted August 11, 2017 What could be the issue here? There are other posts about this and many seem to be for motherboards with the B250 chipset. One user with the issue tried the latest beta of my SIV software and looking at http://forum.corsair.com/forums/showthread.php?p=914685 you should see SIV was able to change his RGB DIMM LEDs. It would be interesting to see if you can also use SIV 5.22 Beta-15 or later to change yours. I think I know why CL 4.8.0.82 is unable to do this and have told Corsair what I think is happening, but I am still awaiting feedback about my theory. Link to comment Share on other sites More sharing options...
teamsalty Posted August 11, 2017 Author Share Posted August 11, 2017 There are other posts about this and many seem to be for motherboards with the B250 chipset. One user with the issue tried the latest beta of my SIV software and looking at http://forum.corsair.com/forums/showthread.php?p=914685 you should see SIV was able to change his RGB DIMM LEDs. It would be interesting to see if you can also use SIV 5.22 Beta-15 or later to change yours. I think I know why CL 4.8.0.82 is unable to do this and have told Corsair what I think is happening, but I am still awaiting feedback about my theory. Looks good to me. I'll try it when I get home and post back. Thanks for the quick reply! Link to comment Share on other sites More sharing options...
red-ray Posted August 11, 2017 Share Posted August 11, 2017 Looks good to me. I'll try it when I get home Good luck and you may find http://rh-software.com/Using%20SIV%20to%20Control%20Corsair%20Link%20Hardware.pdf helpful in setting up SIV. Make sure -AIOLED is specified and use SIV 5.22 Beta-15 or later. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Dustin Posted August 18, 2017 Corsair Employee Share Posted August 18, 2017 We're aware of this bug and are working on a fix. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.