The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Corsair Link

Notices

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 08-13-2015, 05:04 AM
red-ray red-ray is offline
Banned
red-ray's PC Specs
 
Join Date: May 2014
Location: England (GMT+1)
Posts: 7,148
POST ID # = 795643
red-ray Reputation: 81
Angry CL 3.2.5695 - 1 of 4 x CL Mini - down form 2

I have just updated to CL 3.2.5695 and noted as below:
  1. Only 1 of my 4 x CLCC were reported when 3.2.5676 reported 2 .
  2. All the devices connected to the CLCC are reported as being on Channel 1 so clearly is incorrect . Is this a known bug and when will it be fixed?
  3. The H80iGT does not report the Available LED Channel when the H110iGT does. Is this a known bug and when will it be fixed?
  4. When I first ran CL it changed my H80iGT LED from RED to WHITE , but my H110iGT LED stayed RED. Is this a known bug and when will it be fixed?
  5. My AX1500i has 3 temperature sensors, but CL only detected and reported 1 of them .
  6. My RM PSU fan is no longer flashing RED , though CL incorrectly reports that it has a temperature sensor when it should be the +12V Current.
  7. Why is the 1.2.11 cooling node firmware (CorsairLinkCoolingFW_1.2.11.s19.gz) not shipped with CL ?
  8. I can only control my H80iGT Fans, Pump and LEDs using the inbuilt sensor, but can use any sensor with my H110iGT. When will this be addressed? See http://forum.corsair.com/forums/showthread.php?p=795538.
  9. CL correctly ignored my NZXT Kraken .
  10. All my hardware must be working as SIV reports and controls it all (limited H80iGT control) .
  11. Other issues are as before and none have been addressed. See http://forum.corsair.com/forums/showthread.php?p=790530 .
  12. A good feature from my perspective is that CL 3.2.5695 reported so little of my hardware it took less time to recreate the profile .
I realise my system is not typical , but given both HWiNFO and SIV can report it for CL not to is poor. I suspect this will never be addressed with CL3, but how much of it will CL4 report and when will it be released? My main questions are:
  1. Will it support one old Link Commander?
  2. What will be the upper limit of CLCCs supported?
  3. Will it support Cooling Nodes via a CLCC and how many?
  4. Will it support H80s and H100s via a CLCC and how many?
  5. Is there anything CL 3.2.5695 supports that CL4 will not?
  6. In general how many of each model of CL device will be supported?
  7. I know it has not been released, however the requirements specification should have answers to all of these questions.
The devices I have and which were all detected and reported by SIV are as below. You will also see the worker thread usage is only 28% so SIV could easily support more .



What CL 3.2.5695 detected:



What CL 3.2.5695 reported:



What SIV reported:


Attached Images
File Type: png CL 3.2.5695 Devices.png (487.2 KB, 569 views)
File Type: png CL 3.2.5695 System.png (637.3 KB, 624 views)
File Type: png CL 3.2.5695 Link Update.png (88.4 KB, 545 views)
File Type: png CL 3.2.5695 Cooling Status.png (190.3 KB, 567 views)
File Type: png CL 3.2.5695 SIV Summary.png (115.9 KB, 552 views)
File Type: png CL 3.2.5695 Link Limits.png (49.1 KB, 551 views)

Last edited by red-ray; 08-17-2015 at 05:30 AM.
Reply With Quote


1 members found this post helpful.
Reply

Tags
cl4, clcc, firmware, multiple, specification

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:56 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.