View Single Post
Old 08-07-2018, 01:21 PM
DevBiker's Avatar
DevBiker DevBiker is offline
DevBiker's PC Specs
Join Date: Feb 2017
Location: Republic of Texas
Posts: 7,523
POST ID # = 967540
DevBiker Reputation: 88

I would try to go under settings first and see if the fan is configured as 4-pin or 3-pin as appropriate. That does resolve this issue often.
The other question isn't about the USB connection but the SATA power connection. If you are using a molex to SATA adapter for the CoPro, it's not getting the 3.3V rail from the PSU, which is required to run the microcontroller in the CoPro. Showing the screen with your voltages will tell is if that's the case.
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Reply With Quote