View Single Post
  #4  
Old 02-14-2020, 06:18 PM
jamie1073 jamie1073 is offline
Registered User
jamie1073's PC Specs
 
Join Date: Feb 2020
Posts: 41
POST ID # = 1035054
jamie1073 Reputation: 10
Default

MSI boards you go into BIOS and go to the memory settings, set A-XMP to on and you will see the timings listed. Then go down and set the RAM Speed to 3600, I also set the clock to 1800 and the next memclk=fclk just to make sure you get the Infiniti Fabric and memory locked at 1800. You should not need those other two steps as I just do it so nothing funny happens by setting the Fabric slower for some reason, it should set to 1800 on its own. Personally I run my 3600 at 3800 and 1.4v with the Fabric 1:1:1 so it is set to 1900 so I make sure that happens by setting all three values.
Reply With Quote