View Single Post
  #6  
Old 03-09-2011, 10:06 PM
h4mz h4mz is offline
Registered User
h4mz's PC Specs
 
Join Date: Mar 2011
Posts: 4
POST ID # = 492880
h4mz Reputation: 10
Sad fail to boot in bios

after i update the settings, my box just cannot boot, event in BIOS, so i unplugged 3 power cable 2 from HDD and 1 Optical drive and it is still cannot boot, so i reset the bios finally boot
the latest settings when im cannot boot my box is
Code:
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio ..........................: 7X
Fine CPU Clock Ratio.....................:.+0.5
CPU Frequency ...........................: 2.5GHz (333x7.5)


Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 333Mhz
PCI Express Frequency (Mhz) .........: 100
C.I.A.2 .................................:[Disabled]


Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: 800mV
PCI Express Clock Drive.................: 800mV
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)...................: 0ps


DRAM Performance Control
Performance Enhance...................: [Standard]
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............: Auto
Memory Frequency (Mhz) ..............: 1333 ->changed
DRAM Timing Selectable ................: [Manual]

Standard Timing Control
CAS Latency Time........................ 9
tRCD ................................... 9
tRP'.................................... 9
tRAS.................................... 24

Advanced Timing Control
tRRD.......................................... 4 Auto
tWTR.......................................... 4 Auto
tWR........................................... 8 Auto
tRFC.......................................... 60 Auto
tRTP.......................................... 4 Auto
Command Rate (CMD) ........................... 2 Auto ->changed

Driving Strength Profiles
Driving Strength ............................

Channel A
Static tRead Value.........................:8 Auto
tRD Phase0 Adjustment...................: 0 Auto
tRD Phase1 Adjustment...................:0 Auto
tRD Phase2 Adjustment .................:0 Auto
tRD Phase3 Adjustment..................:0 Auto
Trd2rd(Different Rank)....................:9 Auto
Twr2wr(Different Rank)...................:7 Auto
Twr2rd(Different Rank)...................:7 Auto
Trd2wr(Same/Diff Rank)..................:10 Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
DDR Write Leveling.....................:Auto
DDR Write Training.....................:Auto

Channel B
Static tRead Value.........................:9 Auto
tRD Phase0 Adjustment...................:1 Auto
tRD Phase1 Adjustment...................:1 Auto
tRD Phase2 Adjustment .................:1 Auto
tRD Phase3 Adjustment..................:0 Auto
Trd2rd(Different Rank)....................:9 Auto
Twr2wr(Different Rank)...................:7 Auto
Twr2rd(Different Rank)...................:7 Auto
Trd2wr(Same/Diff Rank)..................:10 Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
DDR Write Leveling.....................:Auto
DDR Write Training.....................:Auto

Motherboard Voltage Control
Voltage Type.………... Manual
CPU
CPU Vcore….……….........................:1.2V
CPU Termination….......................:1.2V
CPU PLL………………….........................:1.550V
CPU Reference.………….......................:0.805V

MCH/ICH
MCH Core……………........................: 1.4V -> changed
MCH Reference….…….0.760V...........; <<< Auto
ICH I/O……………….....1.550V............: <<< Auto
ICH Core…………...……1.100V............: <<< Auto

DRAM
DRAM Voltage ……......................: 1.7V
DRAM Termination .…0.750V............: <<< Auto

Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: Disabled
Virtualization Technology................: Enabled
now i think im going crazy.. overclocking is fun, but i absolutely have no basic and experience on overclocking the PC.
please suggest me the correct settings
Reply With Quote