View Single Post
Old 10-04-2015, 11:24 PM
c-attack c-attack is offline
Registered User
c-attack's PC Specs
Join Date: Jun 2014
Posts: 9,228
POST ID # = 812239
c-attack c-attack Reputation: 107

Sure, it is possible. But it would probably involve deliberately pulling on the hoses very, very hard. Regardless, that will not affect the CPU, only what's underneath the leak.

Don't take the Ti SLI heat problem lightly. There are not a lot of people with that configuration and a 900D is probably the best possible case to do this in, but no matter how many fans you have, heat has to leave through an exit. In that post, the problem was there was so much heat passing through the radiator on the way out, it dramatically increased the temperature of the entire assembly. I suspect you can still put a 280mm radiator on the front of a 900D. However, with Skylake a 240mm radiator will be still be more than sufficient. If that can be placed in the bottom of the unit, it may be worth while. If you are looking for options or more specific details, you may wish to start a new post with that topic and give some 900D owners a chance to put forth their experiences.
Reply With Quote