View Single Post
  #2  
Old 04-29-2019, 06:44 PM
c-attack c-attack is offline
Registered User
c-attack's PC Specs
 
Join Date: Jun 2014
Posts: 9,248
POST ID # = 1003008
c-attack c-attack Reputation: 107
Default

I am not sure I quite understand how things are set up or whether the zero rpm reading is true or an error. Is the CPU Fan = 0 just in Link or in the BIOS as well?

Quote:
Originally Posted by Yanta View Post
I put the pump connector on the CPU_FAN header but C/Link refuses to detect the H115i at all if I do that.
You still have the older Asetek H115i (Hexagonal block), correct? It's SATA powered and the header to motherboard CPU fan should give you half the pump speed. It is not a control header in that instance. However, it should have no bearing on the H115i being detected in Link as a device. That's on the USB end and there should be a separate tab for it in Link. Removing the H115i motherboard lead would cause the CPU fan header to read zero.

What happens if you connect a regular fan to CPU_FAN? Do you get BIOS and/or C-Link readings for the header?
Reply With Quote