Daybreaker Posted August 30, 2019 Share Posted August 30, 2019 Hi everyone, I have 6 fans in my case: 4 x LL 120 2 x ML 120 I have all 6 RGB headers connected to the lighting node and connected the fans as following: 2 LL fans are connected to my H100 and the other 4 fans (2 x LL and 2 x ML) are connected to a Thermaltake Commander FP. Now the problem is that random individual LED's flicker on and off at random times. First I thought it was a faulty fan but since it happens to 3 fans (only the LL ones) I doubt they are all faulty since. Also, iCue doesn't seem to be able to properly drive or connect the rgb lighting of the fans. For instance, when I want to edit the fan colours, sometimes it works and sometimes it doesn't. If I want to disable all fan rgb lights it still keeps 1 or 2 led's burning. So I basicly have no real controle over the lighting. I've tried installing the older iCue software but that didn't help. Anyone have an idea of what I could do to solve this problem? Regards Link to comment Share on other sites More sharing options...
DevBiker Posted August 30, 2019 Share Posted August 30, 2019 It could still be a faulty fan. The fans operate in series - 1 fan passes data to the next fan and so on. So one bad fan can impact the entire chain, especially if it's in port #1. Rearrange the fans on the hub and see if the issue persists. Link to comment Share on other sites More sharing options...
Daybreaker Posted September 1, 2019 Author Share Posted September 1, 2019 The fan in port 1 (one of the 4 LL fans I have) keeps working perfectly. It's the other 3 LL fans that are giving me troubles, the 2 ML fans are working fine aswell. I have rearanged them but it still gives me problems with the same 3 fans. Link to comment Share on other sites More sharing options...
hotsquidward Posted October 9, 2020 Share Posted October 9, 2020 I have not updated the icue software or messed with my wires recently and just today 1 of my leds is flickering red and blue. it only happens with lighting effects that change if it's a static color it seems to be ok. https://imgur.com/gallery/buidZJo Link to comment Share on other sites More sharing options...
Corsair Employee Corsair HP Posted October 9, 2020 Corsair Employee Share Posted October 9, 2020 I have not updated the icue software or messed with my wires recently and just today 1 of my leds is flickering red and blue. it only happens with lighting effects that change if it's a static color it seems to be ok. https://imgur.com/gallery/buidZJo Hi Hotsquidward, This is quite an old thread - for a better chance of replying please make a new thread in the future. It does seem like you have a faulty fan, so please try and contact our support team: https://help.corsair.com/hc/en-us/requests/new Link to comment Share on other sites More sharing options...
Recommended Posts