View Single Post
  #5  
Old 11-21-2019, 01:44 PM
c-attack c-attack is offline
Registered User
c-attack's PC Specs
 
Join Date: Jun 2014
Posts: 10,295
POST ID # = 1024725
c-attack c-attack Reputation: 107
Default

Unfortunately you won’t have a choice on the side rad unless you cut the case. There is only a cutout on the top (blocked in this picture). I also thought I could be clever and get around this, but it meant mounting the entire rad/fan assembly inside. That then creates a problem with the top radiator. I wanted top/side, bottom free.

In that early shot, I did have the top rad ports on the right by the front glass. I thought it would be an easier transition from the ports on top of the side rad and then to the pump/res top below. However, a last minute change to a Formula board with 2 more VRM ports made things complicated and I flipped it to the other side. It works both ways. That one you can choose what works best.
Reply With Quote