View Single Post
  #7  
Old 06-18-2018, 11:26 PM
gerr02 gerr02 is offline
Registered User
 
Join Date: Jun 2017
Posts: 9
POST ID # = 959738
gerr02 Reputation: 10
Default

Quote:
Originally Posted by Liversalts View Post
So I got my Multi-Meter out and tested the voltages of the ATX 8-Pin connector, which were spot on (11.95 volts).

Then reconnected both ATX Connectors and when powered on got the usual Flash of RGBs on the MB.

Ensuring all connectors were secure the Fans burst into life every time I wriggled the 24-pin ATX connector.

Looks like I have a loose connection within the ATX connector on the PSU side, as issue is with two Motherboards.

Steep and expensive learning curve!
Hope that totally fixed the issue. A buddy of mine is having almost the same issue with RGB. We'll take a look at it right after we finished installing the new brake pads and truck shocks he ordered from 4WheelOnline for his RAM project. We'll take close at the connectors, especially the ATX.

Last edited by gerr02; 06-18-2018 at 11:29 PM.
Reply With Quote