View Single Post
Old 06-01-2018, 02:15 PM
DevBiker's Avatar
DevBiker DevBiker is offline
iCue βeta Team Green
DevBiker's PC Specs
Join Date: Feb 2017
Location: Republic of Texas
Posts: 7,237
POST ID # = 957006
DevBiker Reputation: 88

A photo of the install would be helpful. It doesn't look like your motherboard has any kind of code or indicator for failure ... can you check your BIOS for beep codes?

Check that the RAM is fully seated. Check that the CPU_FAN is attached and functioning. Make sure that a monitor is attached to the system. Make sure that both the ATX 24-pin and the 8-pin CPU power connector are attached and solid.

I would suggest trying to boot with the bare minimum as well ... no LEDs (if you have any on the LED headers), no hard drive, no dGPU ... just RAM, CPU and power. Plug the monitor into the back of the case. If that works, work your way up from there.

And yes, you can short the pins for the power switch to manually turn the system on. A screwdriver on both pins will do the trick.
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Reply With Quote