View Single Post
  #2  
Old 04-07-2018, 10:32 PM
c-attack c-attack is offline
Registered User
c-attack's PC Specs
 
Join Date: Jun 2014
Posts: 8,777
POST ID # = 949107
c-attack c-attack Reputation: 104
Default

I am trying to imagine 8 HD in the 460x. So is it 240mm radiator push-pull (4xHD120) + HD120 free below. Then 3xHD140 top and rear?

Short answer is you will need two 6 port lighting hubs. That should be easy enough to get in the HD120 3 pack and a HD140 2 pack. That then leaves a pair of singles. You could use the Lighting Node Pro as the Link interface, but if the above configuration is your goal, you might be better off with a Commander Pro as the Link interface. Marginally more expensive plug some useful goodies. Specifically, it will solve the push-pull control issue on a front radiator. You can power and control 2x120 from a H100i v2 or similar, but 4 is too much. The 6 port fan controller on the C-Pro would let you sync the radiator fans to the same coolant temp control variable, plus numerous other sources for the rest of the case fans. All software control from the desktop (6 on C-Pro, 2 on cooler).

Perhaps Zotty or someone can link you their FAQ with all the pretty pictures.
Reply With Quote