Whisky Lima Posted March 28, 2018 Share Posted March 28, 2018 Just a quick suggestion for the graphic for the fans. It would be nice if the alignment of the LEDs on the graphic in iCue was oriented the same way as the fans in real life. So for example, if you hold a fan in front of you, there are two LEDs next to each other that I would say are the top of the fan but in iCue, only 1 LED is represented as the top. if you rotate the image by 45 degrees it's perfect. I have included an image below with the current iCue image on the left and what I think it should look like to better represent the actual fans on the right. Link to comment Share on other sites More sharing options...
Zotty Posted March 28, 2018 Share Posted March 28, 2018 Just a quick suggestion for the graphic for the fans. It would be nice if the alignment of the LEDs on the graphic in iCue was oriented the same way as the fans in real life. So for example, if you hold a fan in front of you, there are two LEDs next to each other that I would say are the top of the fan but in iCue, only 1 LED is represented as the top. if you rotate the image by 45 degrees it's perfect. I have included an image below with the current iCue image on the left and what I think it should look like to better represent the actual fans on the right. This has been noted dude ;).. but well spotted.. now get on Discord lol!!!! Link to comment Share on other sites More sharing options...
Corsair Employee Corsair James Posted March 28, 2018 Corsair Employee Share Posted March 28, 2018 There is a future enhancement coming that will allow users to rotate the fan by 90 degrees so they don't have to unscrew and remount the fans. Link to comment Share on other sites More sharing options...
Whisky Lima Posted March 28, 2018 Author Share Posted March 28, 2018 There is a future enhancement coming that will allow users to rotate the fan by 90 degrees so they don't have to unscrew and remount the fans. Very good, looks like you guys are on top of it! Link to comment Share on other sites More sharing options...
jl94x4 Posted March 28, 2018 Share Posted March 28, 2018 There is a future enhancement coming that will allow users to rotate the fan by 90 degrees so they don't have to unscrew and remount the fans. Is it also going to be possible to move fans via software just incase you never put the fans in the correct order in the commander pro? Yes.. I didn't put them in the order I wanted... Link to comment Share on other sites More sharing options...
Corsair Employee Corsair James Posted March 28, 2018 Corsair Employee Share Posted March 28, 2018 Is it also going to be possible to move fans via software just incase you never put the fans in the correct order in the commander pro? Yes.. I didn't put them in the order I wanted... No, this can't be solved in software because the LED communication through the light strips is in serial. Link to comment Share on other sites More sharing options...
jl94x4 Posted March 29, 2018 Share Posted March 29, 2018 No, this can't be solved in software because the LED communication through the light strips is in serial. So If i want the LED's to sync with the Fans what order in the Commander Pro do I need to have them plugged in? HD controller in LED slot 1 Front Bottom fan - 1 Front middle fan - 2 Front top fan - 3 Back top fan 4 4 LED's chained together in LED slot 2 Then I have the LED strips all the way round the inside edge of the case. They don't match up sequential lighting, how would I achieve this? Link to comment Share on other sites More sharing options...
Whisky Lima Posted March 29, 2018 Author Share Posted March 29, 2018 if you show a quick sketch of your layout I might be able to help Link to comment Share on other sites More sharing options...
Virsacer Posted July 18, 2018 Share Posted July 18, 2018 There is a future enhancement coming that will allow users to rotate the fan by 90 degrees so they don't have to unscrew and remount the fans. That is nice :-) I hope that also includes 180°, 270° and "mirror", so that effects on top-mounted-out-blowing fans can be seen in the same (counter)clockwise direction as front-mounted-in-blowing fans... That would be awesome :-D Also looking forward to the pong effect - there it might also be handy to be able to rotate/mirror the fans individually... Link to comment Share on other sites More sharing options...
ROG_Sv3n Posted September 1, 2018 Share Posted September 1, 2018 There is a future enhancement coming that will allow users to rotate the fan by 90 degrees so they don't have to unscrew and remount the fans. Its still not possible, am I right? Link to comment Share on other sites More sharing options...
Virsacer Posted September 2, 2018 Share Posted September 2, 2018 I didn't find it either... ...and Pong is running left to right :sigh!: Link to comment Share on other sites More sharing options...
DevBiker Posted September 2, 2018 Share Posted September 2, 2018 Its still not possible, am I right? Still not possible. And you aren't the only one waiting for it. Link to comment Share on other sites More sharing options...
eclark5483 Posted January 7, 2019 Share Posted January 7, 2019 (edited) The way I set them up, and it's real easy to remember, is the fans in front will have the LL120/140 barcode label facing to the left (intake). The top fans and rear fan, have the label facing right (exhaust). In a 5/6 fan setup, pong should work properly. I use the pong effect to tune my fan orientation. Edited January 7, 2019 by eclark5483 Link to comment Share on other sites More sharing options...
DangerClose Posted January 7, 2019 Share Posted January 7, 2019 It's hilarious (and sad) that the "future enhancement" mentioned by Corsair James still has not been added to iCue, almost a year later. Link to comment Share on other sites More sharing options...
eclark5483 Posted January 21, 2019 Share Posted January 21, 2019 Here's a visual inside the iQue software showing fan orientation of a setup consisting of 6 fans. 2 in the front as intake, 3 on top as exhaust, and 1 in the rear, also exhaust. Link to comment Share on other sites More sharing options...
Shinchan Posted January 22, 2019 Share Posted January 22, 2019 also color left swap is a nice option. Why i ask? I have 4 as intake fan. 3 in front. 1 at bottom. 1 at back. 2 on H115i Top as exhaust. So the fans are surrounding the TT View 71 case. However, does not matter how much i try to rotate and align the color for Spiral Rainbow. The orientation of intake vs out. the 2 quadrant color will be flip. Since its intake vs out. Link to comment Share on other sites More sharing options...
Virsacer Posted February 16, 2021 Share Posted February 16, 2021 Well, rotation has been added, but what about mirroring (for fans blowing in and others blowing out)? Link to comment Share on other sites More sharing options...
Recommended Posts