Fluffeepuff Posted July 19, 2019 Share Posted July 19, 2019 Hi all - I have an H150i Pro on the way which I plan to match with an X570 build (either Gigabyte Aorus Master or MSI MEG ACE) in a month or so. Can [and what] is controllable via motherboard connector & BIOS settings when compared to iCUE software? I found a thread talking about the H115i being controlled by BIOS, but it was only the fans and not the pump. Is the H150i Pro any different? Which headers would I connect to what for maximum control/monitoring capability without iCUE. CPU_Fan is the obvious one for the fans which I assume are either DC or PWM controlled. If the H150i Pro is covered in another thread, please just send me that way (I couldn't find it). Thanks Link to comment Share on other sites More sharing options...
DevBiker Posted July 19, 2019 Share Posted July 19, 2019 Only the fans would be controllable via motherboard headers. The pump can only be controlled via software (iCUE/Link). Link to comment Share on other sites More sharing options...
Fluffeepuff Posted July 19, 2019 Author Share Posted July 19, 2019 Only the fans would be controllable via motherboard headers. The pump can only be controlled via software (iCUE/Link). Thanks for the heads-up; will the pump just run at max if not controlled by s/w? Link to comment Share on other sites More sharing options...
DevBiker Posted July 20, 2019 Share Posted July 20, 2019 Thanks for the heads-up; will the pump just run at max if not controlled by s/w? I think the default is balanced but I'm not 100% sure about that. With the PRO coolers, the value reported as RPM on the fan connector is the same as the pump RPM so you can at least see it. Link to comment Share on other sites More sharing options...
Recommended Posts