View Single Post
  #2  
Old 04-18-2016, 01:59 PM
DanilS DanilS is offline
Registered User
 
Join Date: Apr 2016
Posts: 7
POST ID # = 847811
DanilS Reputation: 10
Default

Okey....result after 6+hours of this....

Windows
can detect this device by NEW name two screenshots from windows
http://en.zimagez.com/zimage/1041107...5109910812.php
http://www.zimagez.com/zimage/f015c7...520ef63f0d.php

...and thats all...I do not know how to fix it on windows....


Linux
my best result http://pastebin.com/DczJtYYu
Code:
[ 4364.782660] ata1.00: ATA-10: SATAFIRM   S9, S9FM02.0, max UDMA/133
[ 4364.782663] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4364.782968] ata1.00: configured for UDMA/133
[ 4364.782980] ata1: EH complete
[ 4364.783149] scsi 0:0:0:0: Direct-Access     ATA      SATAFIRM   S9    02.0 PQ: 0 ANSI: 5
[ 4364.783470] sd 0:0:0:0: [sde] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 4364.783509] sd 0:0:0:0: Attached scsi generic sg4 type 0
[ 4364.783511] sd 0:0:0:0: [sde] Write Protect is off
[ 4364.783513] sd 0:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 4364.783526] sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4392.190830] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
[ 4392.190846] ata1.00: failed command: READ FPDMA QUEUED
[ 4392.190864] ata1.00: cmd 60/08:08:00:00:00/00:00:00:00:00/40 tag 1 ncq 4096 in
         res 40/00:08:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 4392.190874] ata1.00: status: { DRDY }
[ 4392.190885] ata1: hard resetting link
and hdparm can "comunicate" with /dev/sde
for read info error is HDIO_DRIVE_CMD(identify) failed: Input/output error

only one way I found http://forum.corsair.com/v3/showpost...1&postcount=32
this post tell-I need .vic file for "try" upload firemware by hdparm

...but-I has no because "corsair tool" can not detect my SSD...and there no "link" to download firmware...............................................
Reply With Quote