View Single Post
  #3  
Old 09-17-2014, 04:11 AM
gncdm gncdm is offline
Registered User
gncdm's PC Specs
 
Join Date: Sep 2014
Posts: 2
POST ID # = 728189
gncdm Reputation: 10
Default

I double checked everything you listed above;
The two H100i fans are plugged into the pump through the Y splitter cable
I swapped the cable to another USB2.0 header on my motherboard, however, now it doesn't recognise my H100i after reinstalling Link. Popup appeared saying that there was no hardware to update.
There was briefly a yellow warning triangle in device manager which has since disappeared.

EDIT
Fixed the problem by routing a mini USB to USB cable from the block through the grommets in the back of the case to a USB2.0 hub on the I/O of my motherboard, Link now picks up the H100i fine.

There is now an audible clicking noise from one of the fans every 2 seconds or so which wasn't occurring before.

Last edited by gncdm; 09-17-2014 at 04:46 AM.
Reply With Quote