View Single Post
Old 09-16-2014, 02:56 PM
Protocol48's Avatar
Protocol48 Protocol48 is offline
Registered User
Protocol48's PC Specs
Join Date: Apr 2014
Location: Pomona, NY
Posts: 148
POST ID # = 728086
Protocol48 Reputation: 14
Default H100I not recognized

When your H100i is working in Link, you should get a Device page that looks like the attached picture with two devices showing.

Are your H100i fans plugged into the H100i Pump?
Is your H100i pump plugged into the MB's CPU Fan Header?
Is you H100i pump also plugged into a USB2.0 fan header on your motherboard?
If these are true, not every solution fixes every PC/MB, but
Among my fixes were:
1. Shut down PC completely, turn off PSU, then plug the Pump's USB 2.0 plug into a different MB fan header, then power up.
2. Uninstall the Link software And the Corsair folder in your C:\Users\"user name"\AppData\Roaming\Corsair, reboot, then re-install the software. (If you do not delete the Corsair folder, re-installing Link wont fix it.)
3. After#2 above, I also tried different Link software versions. Some versions work better than others depending on if you have any/different Link Nodes installed.
Attached Images
File Type: png H100i Options Device Tab display.png (49.8 KB, 290 views)

Last edited by Protocol48; 09-19-2014 at 04:26 PM.
Reply With Quote