View Single Post
Old 02-24-2020, 08:14 PM
DevBiker's Avatar
DevBiker DevBiker is offline
DevBiker's PC Specs
Join Date: Feb 2017
Location: Republic of Texas
Posts: 8,701
POST ID # = 1035944
DevBiker Reputation: 94

It could be a bad fan.
Here's the thing: the fans operate in series. One fan passes data to the next fan. So if one fan is wonky, it throws all of them off.
Determining which fan is tedious but if you are methodical about it, you can narrow it down.
Take a fan. Put it in port #1. Does it work fine? If so, move it to port #2.
Take a second fan. Put it in port 1. Does it work? Does the next fan work?
Do this for all of the fans. Once you are done, you'll need to take the fan that's been in port #2 and put it on Port #1 with a validated fan to check if it passes the signal correctly.
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Helpful Links and FAQs:
HydroX FAQ | RGB Cables |
iCUE Tips & Tricks

Reply With Quote