View Single Post
  #5  
Old 04-30-2018, 08:35 PM
devinvisible devinvisible is offline
Registered User
devinvisible's PC Specs
 
Join Date: Apr 2018
Posts: 5
POST ID # = 952815
devinvisible Reputation: 10
Default

I did try 3 different 120mm fans and they all ran into the same issue.

I measured the distance of the radiator mounting holes that are opposite corners from each other (where a single fan would go). One is 5 9/16" and the other is 6 1/16". I measured the diagonals of the fans that came with the product and they both measure just shy of 5 14/16". Pretty significant difference.

IMG_3297: My initial top down photo. Tried to use flash on my phone otherwise the lights in my kitchen blew it out. The radiator's right edge (in the photo) was aligned with the table cloth pattern.

IMG_3301: I had to place something (mouse pad in this case) on the granite counter to prevent glare. The hoses coming off the radiator are both flush to the counter edge and you can clearly see that the radiator is warped.
Attached Images
File Type: jpg IMG_3297.JPG (1.71 MB, 156 views)
File Type: jpg IMG_3301.JPG (1.27 MB, 156 views)
Reply With Quote