View Single Post
  #5  
Old 11-15-2019, 05:15 PM
margar2 margar2 is offline
Registered User
 
Join Date: Nov 2019
Posts: 9
POST ID # = 1024051
margar2 Reputation: 10
Default

Quote:
Originally Posted by Nazgul View Post
For my case, I have the Phanteks Evolv X, which is pretty much the same size as the 500D but! I have 3x 140mm fans in the front and the Pump/Reservoir mounted on the fan, no front RAD and a card that's the same size as the 2080 and the Pump/Res mounted in the front is probably an inch away from touching the card.
But if you do the vertical mount it could clear the Pum/Res. And if you put a drain valve, there won't an issue. So it looks like you might do the config you want with that case.
Thanks for the info! Can you post a picture of your system?

I found this picture online, it'seems the 360mm radiator should fit. But he's using soft tubing so this could help and my choice was hard tubing.
Attached Images
File Type: jpg 264857.2b333931d46049ac03b8036adfcc0cc3.1600.jpg (216.4 KB, 16 views)
Reply With Quote