jassim84 Posted December 19, 2018 Share Posted December 19, 2018 I have a motherboard ASUS ROG Maximus XI Formula Z390 ddram : CORSAIR Vengeance RGB Pro 32GB (4 x 8GB) 288-Pin DDR4 DRAM DDR4 3200 (PC4 25600) Desktop Memory Model CMW32GX4M4C3200C16 But when the device is turned on with 4 RAM installed the error code CC When the device is turned on, 2 pieces RAM operate normally (b1.b2) Are there special settings? Or timming settings? Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Mordred Posted December 21, 2018 Corsair Employee Share Posted December 21, 2018 Hi jassim84 I suggest running each DIMM individually to see if it's a single stick causing the issues. if it is, please create a ticket at https://support.corsair.com and we can look at providing further assistance for you. Regards, Mordred Link to comment Share on other sites More sharing options...
emsir Posted April 18, 2020 Share Posted April 18, 2020 I have the same problem with 4x8 GB 3200 mhz on maximus XI. I tried to swap my 4x8 GB Vengeance 3000 mhz from another computer, and no problem. And on My maximus X machine the 3200 mhz Corsair LED Ram 4x8 gb runs just fine. Tried this for 5 days and no problem. Swapped back...and boom, after 2 hours BSOD. There must be something with maximus XI boards and some corsair memory module Link to comment Share on other sites More sharing options...
Recommended Posts