View Single Post
Old 12-02-2018, 05:28 PM
almeus almeus is offline
Registered User
almeus's PC Specs
Join Date: Nov 2018
Posts: 5
POST ID # = 983225
almeus Reputation: 10

Originally Posted by DevBiker View Post
So ... the fans are still turning so you are OK there.
And we'll start with the Lighting Node Pro since that's not detected, it's likely dead. And that would cause issues.

You can do an RMA as long as you have the receipt/invoice. If you bought it online, you should be able to look it up.

If you have a multimeter, you can check to see if the RGB Fan Hub is providing power. Pin 1 is +5V and Pin 4 is Ground. This device has a capacitor that could have been blown by the surge as well ... but we cannot confirm that until we get a Lighting Node Pro that's detected and controllable.
I just got my hands on a decent multimeter. Assuming you're talking about the ports labelled 1-6 that the RGB leads of the fans connect to. They are outputting 5 V.
Reply With Quote