View Single Post
  #6  
Old 12-12-2015, 07:11 PM
emissary42's Avatar
emissary42 emissary42 is offline
Registered User
emissary42's PC Specs
 
Join Date: Aug 2013
Location: Nehr'esham
Posts: 989
POST ID # = 825290
emissary42 emissary42 Reputation: 122
Default

The Ver4.29 one should do DDR3-2133 11-11-11-28 around 1.5-1.6V and DDR3-2400 11-13-13-31 around 1.6-1.65V. You might even be able to tighten the timings down a bit, but do basic stability testing first. If DDR3-2133 CL11 is possible at or below 1.50V, then you should be able to run them at 10-11-11 or even 9-11-11 with a bit more voltage (CL9 might require more than 1.65V). If you are lucky they might do DDR3-2400 CL10 and/or tRCD=tRP=12 below 1.65V.

The Ver8.22 one will probably not go that high if OC at all, at least i personally never had any luck with 4Gbit Nanya ICs beyond DDR3-2000.
Reply With Quote


1 members found this post helpful.