The Corsair User Forums  

Go Back   The Corsair User Forums > Search Forums

Notices

Showing results 1 to 25 of 9568
Search took 0.44 seconds.
Search: Posts Made By: c-attack
Forum: Cooling 12-05-2019, 09:29 PM
Replies: 1
Views: 20
Posted By c-attack
Absolutely. Also, there is no side of the...

Absolutely. Also, there is no side of the radiator that is automatically better for fan placement. It is very fan, mount, case specific and mostly relates to the tone of the resulting air vs actual...
Forum: iCUE Software 12-05-2019, 08:36 PM
Replies: 12
Views: 88
Posted By c-attack
Right. So say I am running push-pull on a 360mm...

Right. So say I am running push-pull on a 360mm (or whatever). I can take 1 C-Pro header and connect the master control wire from the powered hub. Then put all 6 fans on the hub. They pull their...
Forum: iCUE Software 12-05-2019, 08:28 PM
Replies: 2
Views: 34
Posted By c-attack
The macros you can drag or copy from the Action...

The macros you can drag or copy from the Action menu the Actions Library. Then it can be dragged back into the desired profile. I am in the same boat with 100 something profiles that are mostly...
Forum: Hydro X Custom Cooling 12-05-2019, 08:17 PM
Replies: 5
Views: 28
Posted By c-attack
Could reset on iCUE updates (definitely roll...

Could reset on iCUE updates (definitely roll backs) or every now and then the fan curves reset to default. Haven't seen that in a while, but if you are on Auto, you won't see it.
Forum: iCUE Software 12-05-2019, 08:16 PM
Replies: 12
Views: 88
Posted By c-attack
Essentially what you have been doing. My Corsair...

Essentially what you have been doing. My Corsair 740 water build is 9 fans + Pump on #6. I've been running it for two years. The commander pro holds up. I have had quite a few wonky splitters...
Forum: iCUE Software 12-05-2019, 07:43 PM
Replies: 12
Views: 88
Posted By c-attack
Last resort, you might try swapping port 4's fan...

Last resort, you might try swapping port 4's fan with another that only needs a single - just to see. After that, contact Corsair Support through the ticket system.
Forum: iCUE Software 12-05-2019, 07:33 PM
Replies: 12
Views: 88
Posted By c-attack
Go into the Commander Pro settings and change...

Go into the Commander Pro settings and change Ports 1-6 from Auto to PWM. You likely already did this for the pump on #6. Even if not related, this will prevent an unnecessary "fan test" on boot...
Forum: Hydro X Custom Cooling 12-05-2019, 07:27 PM
Replies: 5
Views: 28
Posted By c-attack
Yes. 4 pin is the PWM control you need. The...

Yes. 4 pin is the PWM control you need. The auto setting does not work in detecting the device because it is only 2 pin, unlike a standard DC or PWM fan motor. If you leave it on auto, it thinks...
Forum: iCUE Software 12-05-2019, 06:53 PM
Replies: 12
Views: 88
Posted By c-attack
What fans (model) are plugged into 1-5?

What fans (model) are plugged into 1-5?
Forum: Cooling 12-05-2019, 06:50 PM
Replies: 15
Views: 1,578
Posted By c-attack
That is a fan repeated or powered fan splitter. ...

That is a fan repeated or powered fan splitter. It takes 1 PWM signal from the motherboard and then repeats it for all fans on the hub. I can't tell from looking at it anything more than that. ...
Forum: Hydro X Custom Cooling 12-05-2019, 06:39 PM
Replies: 5
Views: 28
Posted By c-attack
Make sure the Commander Pro #6 is set to "4 pin"...

Make sure the Commander Pro #6 is set to "4 pin" PWM and not Auto in the settings menu (top bar). Try using a fixed speed to test control. Click + in the Performance tab. That will create a...
Forum: Keyboards and Mice 12-05-2019, 06:11 PM
Replies: 1
Views: 19
Posted By c-attack
There are all K95 Platinum. “12” is the Cherry...

There are all K95 Platinum. “12” is the Cherry Brown variant. “14” is the Cherry Speed switch version. To my knowledge, there never was a 13. It may have been reserved for Cherry Blue or a cherry Red...
Forum: iCUE Software 12-05-2019, 05:40 PM
Replies: 4
Views: 25
Posted By c-attack
There is a import/export function for profiles in...

There is a import/export function for profiles in the main profile tab.

There is a local copy. It was referenced above in the C:Users/(name)/App Data (hidden)/Roaming/Corsair folder. The...
Forum: iCUE Software 12-05-2019, 07:08 AM
Replies: 4
Views: 91
Posted By c-attack
There seem to be some different reactions between...

There seem to be some different reactions between models based on the number of keys. An 18 G key board reacts differently to the 6 G key version and to the KBs with no G keys. I suspect that hints...
Forum: Cases 12-05-2019, 06:51 AM
Replies: 1
Views: 25
Posted By c-attack
The 680X will allow you to top mount the 240mm...

The 680X will allow you to top mount the 240mm radiator. Lots of space up there. However, it is shorter in length and I am not sure how you would like the visual aspect of running the GPU right up to...
Forum: Cooling 12-05-2019, 06:45 AM
Replies: 6
Views: 75
Posted By c-attack
All GPUs are little hot rocks. Bump the curve up...

All GPUs are little hot rocks. Bump the curve up if needed. 100 rpm is not meaningful for cooling. It may be meaningful for noise. The effective work zone for those 140mm is between 700-1200, so as...
Forum: Keyboards and Mice 12-04-2019, 09:49 PM
Replies: 3
Views: 59
Posted By c-attack
There are a number of posts like the one below. ...

There are a number of posts like the one below. Do not uninstall and roll back without preparation. Your profiles are not backward compatible. You will need to start over and re-import or...
Forum: Cooling 12-04-2019, 09:45 PM
Replies: 6
Views: 75
Posted By c-attack
Obviously not the same "H115i" you have, although...

Obviously not the same "H115i" you have, although that does not change the mechanic for applying fan curves, pump speeds, or the like. However, I don't really like the CPU core #1 temp graph for ANY...
Forum: iCUE Software 12-04-2019, 09:24 PM
Replies: 12
Views: 255
Posted By c-attack
Don't worry about starting new posts. You always...

Don't worry about starting new posts. You always can do that. Many posts have issues that might have one symptom in common, but arise from entirely different factors. The solutions are also model...
Forum: iCUE Software 12-04-2019, 08:45 PM
Replies: 14
Views: 328
Posted By c-attack
Can you guys clarify what you think is happening?...

Can you guys clarify what you think is happening? Does it seem like the ICW is working under software mode, then suddenly drops out of iCUE and thus into HW mode. Since you have a different DPI...
Forum: Cooling 12-04-2019, 07:08 AM
Replies: 6
Views: 75
Posted By c-attack
Well, I’m afraid that was an unfortunate way to...

Well, I’m afraid that was an unfortunate way to describe the process. The Pro series pumps have three fixed speeds — Quiet = 1100, Balanced 2160, Extreme 2850, all +-30 rpm. Those same “presets” on...
Forum: Cooling 12-03-2019, 09:44 PM
Replies: 6
Views: 56
Posted By c-attack
You would still need the RGB Lighting Hub...

You would still need the RGB Lighting Hub (https://www.corsair.com/us/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Cooling-And-Corsair-Link/CORSAIR-RGB-Fan-LED-Hub/p/CO-8950020). This...
Forum: Hydro X Custom Cooling 12-03-2019, 09:41 PM
Replies: 3
Views: 127
Posted By c-attack
I am not sure the device drop is related to Aura,...

I am not sure the device drop is related to Aura, but you never know with that one. There are reports of the Commander Pro or other USB devices dropping out and reconnecting on the Ryzen 570x...
Forum: iCUE Software 12-03-2019, 09:26 PM
Replies: 4
Views: 91
Posted By c-attack
Same issue affecting everyone else and titled as...

Same issue affecting everyone else and titled as "ESC issues, G-key problems, F1 wrong keys, etc. in the keyboard and iCUE forums. Try deleting anything you have in the Actions Library while leaving...
Forum: Power Supplies 12-03-2019, 07:39 PM
Replies: 3
Views: 57
Posted By c-attack
Probably since it is a 1200 watt PSU. In the...

Probably since it is a 1200 watt PSU. In the default mode, the fan will trigger under certain conditions. There is a graph in the product manual (and probably on the box as well) that shows the...
Showing results 1 to 25 of 9568

 
Forum Jump

All times are GMT -4. The time now is 11:40 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.