The Corsair User Forums  

Go Back   The Corsair User Forums > Search Forums

Notices

Showing results 1 to 25 of 10000
Search took 0.44 seconds.
Search: Posts Made By: c-attack
Forum: iCUE Software 07-03-2020, 06:34 PM
Replies: 1
Views: 69
Posted By c-attack
The RGB Lighting Hub that is powering the three...

The RGB Lighting Hub that is powering the three SP120-PRO... where did it come from? Is the one that came with your 570X case? Presumably it was working before with the older SP-RGB? Try the...
Forum: iCUE Software 07-03-2020, 01:52 PM
Replies: 4
Views: 112
Posted By c-attack
There are lot of things I can't be bothered with....

There are lot of things I can't be bothered with. Unwarranted rudeness is near the top of the list. There is nothing respectful or constructive about your reply.

You only have the half the...
Forum: Cooling 07-03-2020, 09:53 AM
Replies: 2
Views: 71
Posted By c-attack
The H80i v2 is plenty for the 9700K. Most single...

The H80i v2 is plenty for the 9700K. Most single panel water coolers are capable, but having more radiator surface area allows you get away with much lower fan speeds. The larger factor in 120mm...
Forum: iCUE Software 07-03-2020, 08:30 AM
Replies: 4
Views: 112
Posted By c-attack
The loss of fan control after sleep is an old...

The loss of fan control after sleep is an old issue and it seems hardware limited on the dongle end. There is no solution I know of aside from restart or re-connect. I got tired of it and ran a USB A...
Forum: Cooling 07-03-2020, 07:56 AM
Replies: 4
Views: 128
Posted By c-attack
The same reason you can run faster in still air...

The same reason you can run faster in still air than into a 25 mph headwind or with me grabbing onto the back of your shirt. Resistance is resistance, regardless of the direction it comes from (front...
Forum: Cooling 07-02-2020, 07:33 PM
Replies: 4
Views: 128
Posted By c-attack
It is likely physical (pressure) and not...

It is likely physical (pressure) and not mechanical or software related. The "2000 rpm" is the rated speed in free air with no resistance, +-10%. Even disregarding normal variance, you typically...
Forum: Cooling 07-02-2020, 07:28 PM
Replies: 4
Views: 78
Posted By c-attack
Leaving it disabled would force the air cooler's...

Leaving it disabled would force the air cooler's fans to run at 100% all the time. Take it off disabled to return normal speed control for the CPU Fan header to the BIOS or other desktop software.
Forum: Cooling 07-01-2020, 06:33 AM
Replies: 3
Views: 189
Posted By c-attack
All coolers will give you the same cpu temp at...

All coolers will give you the same cpu temp at 100% load — at least for a few seconds. It’s what happens after that reveals the differences. Smaller coolers will slowly start to loose ground at the...
Forum: Cooling 07-01-2020, 06:22 AM
Replies: 1
Views: 106
Posted By c-attack
It doesn’t really matter where you connect the...

It doesn’t really matter where you connect the lead from the H100i XT. All it does on that model is report a pump speed to the BIOS. Most people will want it on CPU fan to solve (take advantage of)...
Forum: Cooling 06-29-2020, 07:43 AM
Replies: 1
Views: 107
Posted By c-attack
If you want software control over the fan speed,...

If you want software control over the fan speed, you need a Commander Pro. This will also serve as lighting controller and replace any Lighting Node Pros you have from the LL multipacks. The...
Forum: Memory 06-29-2020, 07:23 AM
Replies: 3
Views: 140
Posted By c-attack
In iCUE go to Settings -> RAM and uncheck “enable...

In iCUE go to Settings -> RAM and uncheck “enable full software control”. You are now in “hardware mode”.

Go to the RAM lighting and create a new effect -> static 0,0,0 black

Go back to...
Forum: iCUE Software 06-29-2020, 07:16 AM
Replies: 3
Views: 190
Posted By c-attack
Unable to change as in the controls don’t...

Unable to change as in the controls don’t respond? Red triangle error on the RAM in iCUE? Or RAM is no longer detected at all?
Forum: Cooling 06-28-2020, 01:05 PM
Replies: 2
Views: 120
Posted By c-attack
Each QL fan has 35 LEDs. The LL fan you replaced...

Each QL fan has 35 LEDs. The LL fan you replaced has 16. The cooler maxes out at 2x16. Current is the limiting factor in most of these lighting applications and there is a reason it is offloaded...
Forum: Cooling 06-28-2020, 07:24 AM
Replies: 3
Views: 189
Posted By c-attack
They will never be the same except when the PC is...

They will never be the same except when the PC is powered off. The CPU is 70C temperature because the pins underneath are applying a certain level of voltage. That level changes rapidly and so does...
Forum: Cooling 06-27-2020, 06:10 PM
Replies: 4
Views: 138
Posted By c-attack
If you really have a fan bearing problem, there...

If you really have a fan bearing problem, there will be definite strange noises that increase with fan speed and stop with fan in a zero state. It doesn't happen too often with fans these days.
Forum: Cooling 06-27-2020, 05:29 PM
Replies: 2
Views: 159
Posted By c-attack
Any USB mini to internal USB 2.0 (9 pin)...

Any USB mini to internal USB 2.0 (9 pin) connector will work. There are generic ones available on most retail sites.

However, I suspect you have an issue. There is no pump or fan speed setting...
Forum: Keyboards and Mice 06-27-2020, 05:17 PM
Replies: 3
Views: 147
Posted By c-attack
I think the thread you referenced is related to...

I think the thread you referenced is related to something else. It pre-dates the XT and its double shot keycaps. They are supposed to feel stronger and are definitely more resilient than the...
Forum: Cooling 06-27-2020, 02:03 PM
Replies: 3
Views: 169
Posted By c-attack
Seems like a mechanical issue. The orientation...

Seems like a mechanical issue. The orientation should not matter. Move toward replacement.
Forum: Keyboards and Mice 06-27-2020, 01:44 PM
Replies: 3
Views: 147
Posted By c-attack
You have PBT keycaps on the XT. That will change...

You have PBT keycaps on the XT. That will change the lighting transmission. The LEDs underneath are the same as every other Corsair K70/K95 keyboard.
Forum: Cooling 06-27-2020, 01:42 PM
Replies: 3
Views: 130
Posted By c-attack
You have a lighting controller (the Commander). ...

You have a lighting controller (the Commander). What you're missing is the power for the fan lighting. That's the RGB Lighting Hub if you want to run it from the Commander or QL and newer fans come...
Forum: Motherboard Integration 06-27-2020, 09:19 AM
Replies: 4
Views: 199
Posted By c-attack
The problem is you still need a lighting...

The problem is you still need a lighting controller for the "one fan". That cable connects the controller to MB RGB 5v header. If you look in the description for that cable it mentions this and...
Forum: Cooling 06-27-2020, 09:06 AM
Replies: 3
Views: 169
Posted By c-attack
I can't tell from that whether it's a fan hitting...

I can't tell from that whether it's a fan hitting something or the pump, nor could I see the screen. I'll assume you got either a CPU_FAN boot error or a CPU temp warning on the BIOS screen. With...
Forum: Cooling 06-26-2020, 06:23 PM
Replies: 1
Views: 115
Posted By c-attack
It's hard to pick up much performance gain at the...

It's hard to pick up much performance gain at the rear exhaust unless you have one clanker of a fan that you can't bring yourself to run at more than 600 rpm. Most all fans will be effective.

On...
Forum: Cases 06-26-2020, 05:04 PM
Replies: 10
Views: 355
Posted By c-attack
Auto voltage + altered multiplier will almost...

Auto voltage + altered multiplier will almost always pack on extra juice. That is a quick and relatively easy fix.

The +15C on the coolant rise tells us the case is heating up. There might be 5C...
Forum: Cases 06-26-2020, 01:57 PM
Replies: 1
Views: 111
Posted By c-attack
Because the Lighting Node Core that comes with...

Because the Lighting Node Core that comes with the QL has it's own internal lighting controller, you have a fair amount of flexibility here. You can go up to 6 LL or 6 QL in any combination. The...
Showing results 1 to 25 of 10000

 
Forum Jump

All times are GMT -4. The time now is 07:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.