The Corsair User Forums  

Go Back   The Corsair User Forums > Search Forums

Showing results 1 to 25 of 191
Search took 0 seconds.
Search: Posts Made By: Corsair GregX
Forum: Hydro X Custom Cooling 02-25-2020, 10:50 AM
Replies: 2
Views: 67
Posted By Corsair GregX
No need to be worried, you can freely use it...

No need to be worried, you can freely use it until your planned maintenance interval. Then a flush with distilled water is suggested.
Forum: Hydro X Custom Cooling 02-25-2020, 10:46 AM
Replies: 2
Views: 136
Posted By Corsair GregX
Hi, Prior to being packed, a leak test is...

Hi,

Prior to being packed, a leak test is performed on every CPU and GPU water block.

Was the packaging of the GPU water block factory sealed?
Forum: Hydro X Custom Cooling 02-22-2020, 01:02 PM
Replies: 4
Views: 171
Posted By Corsair GregX
We recommend changing your custom cooling...

We recommend changing your custom cooling system’s fluid every 12 months to remove particulate build-up and ensure optimal thermal performance.
Forum: Hydro X Custom Cooling 02-12-2020, 02:57 PM
Replies: 8
Views: 1,089
Posted By Corsair GregX
Yes, this is specific to the Hydro X GPU water...

Yes, this is specific to the Hydro X GPU water blocks made for the ASUS Strix models.
VRM components (chokes and capacitors) are higher so the flow path has to "jump" over.
It does look good, hats...
Forum: Hydro X Custom Cooling 02-12-2020, 02:38 PM
Replies: 6
Views: 327
Posted By Corsair GregX
An additional 360mm radiator would add great...

An additional 360mm radiator would add great cooling potential to add the CPU water block to the loop but I believe you'll not be able to install it together with an existing 280mm radiator.
I...
Forum: Hydro X Custom Cooling 01-16-2020, 10:26 AM
Replies: 1
Views: 197
Posted By Corsair GregX
Hi, Hope this image helps. ...

Hi,

Hope this image helps.
https://i.imgur.com/2BCfFCR.png
Forum: Hydro X Custom Cooling 01-16-2020, 10:02 AM
Replies: 5
Views: 274
Posted By Corsair GregX
Hi, For RGB on XD5, you will need to...

Hi,

For RGB on XD5, you will need to connect the RGB connector to LED 1 or LED 2 on Commander PRO.
Please see the video for more details:...
Forum: Hydro X Custom Cooling 12-23-2019, 05:18 AM
Replies: 7
Views: 414
Posted By Corsair GregX
Hi! I'm sorry for the bad experience. Such a...

Hi!

I'm sorry for the bad experience. Such a state of fittings is definitely not something that would skip through our QC. These had to be tampered with prior to your purchase.

Could you...
Forum: Hydro X Custom Cooling 12-18-2019, 07:00 PM
Replies: 19
Views: 770
Posted By Corsair GregX
There is quite a healthy stock over on...

There is quite a healthy stock over on corsair.com...
Forum: Hydro X Custom Cooling 12-18-2019, 06:52 PM
Replies: 7
Views: 584
Posted By Corsair GregX
Such behavior of the pump motor could be related...

Such behavior of the pump motor could be related to the way it's been controlled. Have you tried to remove the 4-pin connector from the Commander PRO or any other header and try to start the system?...
Forum: Hydro X Custom Cooling 12-17-2019, 04:56 AM
Replies: 3
Views: 282
Posted By Corsair GregX
Hi! They are 14mm hardline fittings. ...

Hi!

They are 14mm hardline fittings.

Will make sure to properly update the specs listing page, thank you!
Forum: Hydro X Custom Cooling 12-12-2019, 08:12 AM
Replies: 2
Views: 289
Posted By Corsair GregX
Hi Tom, Afraid there are no compatible GPU...

Hi Tom,

Afraid there are no compatible GPU water blocks for your graphics card model. It's built on an incompatible PCB layout.
Forum: Hydro X Custom Cooling 12-11-2019, 11:04 AM
Replies: 9
Views: 1,053
Posted By Corsair GregX
The pump unit is definitely not faulty. Since it...

The pump unit is definitely not faulty. Since it occurs only in a certain RPM range it has to be caused by some kind of resonance in the system.
You can recheck if the pump unit is firmly secured...
Forum: Hydro X Custom Cooling 12-09-2019, 03:52 PM
Replies: 1
Views: 269
Posted By Corsair GregX
Hi, Thank you a detailed input! ...

Hi,

Thank you a detailed input!
Unfortunately, there are no plans to support the MSI 2070 SUPER Gaming series, sorry.
Forum: Hydro X Custom Cooling 12-09-2019, 04:30 AM
Replies: 2
Views: 274
Posted By Corsair GregX
Just a note, the Hydro X products with RGB can be...

Just a note, the Hydro X products with RGB can be daisy-chained.
Usually, it's the XD5 pump/res -> CPU or GPU water block and can be set up in basically all case sizes.

If that is not the case,...
Forum: Hydro X Custom Cooling 12-09-2019, 04:02 AM
Replies: 3
Views: 537
Posted By Corsair GregX
Max power rating of the header is not a concern...

Max power rating of the header is not a concern with the XD5 pump/res since it’s powered by a dedicated cable directly from PSU. It's molex type power connector.

To control the pump the fan header...
Forum: Hydro X Custom Cooling 12-09-2019, 03:40 AM
Replies: 19
Views: 770
Posted By Corsair GregX
Hi, Just to make sure, can you also share...

Hi,

Just to make sure, can you also share the P/N of your graphics card?

Compatibility wise, the Rev. B has a minor adjustment in order to be able to fit to more graphics card models....
Forum: Hydro X Custom Cooling 12-04-2019, 08:53 AM
Replies: 1
Views: 273
Posted By Corsair GregX
Hi! Yes, Hydro X Series XF Compression...

Hi!

Yes, Hydro X Series XF Compression 10/13mm will work with the cooling solution found on the ASRock X570 AQUA.
Forum: Hydro X Custom Cooling 12-02-2019, 09:25 AM
Replies: 1
Views: 681
Posted By Corsair GregX
Hi! Can confirm that the MSI MPG Z390M...

Hi!

Can confirm that the MSI MPG Z390M Gaming Edge AC will work with the XC7.
We'll also amend the compatibility list. It'll be updated this Friday.
Forum: Hydro X Custom Cooling 12-02-2019, 06:06 AM
Replies: 7
Views: 558
Posted By Corsair GregX
Might be possible to use the 1000D if you won't...

Might be possible to use the 1000D if you won't add a secondary mini ITX system.
I would warmly suggest to go with 1000D since it really does support enough radiator positions for such a beastly...
Forum: Hydro X Custom Cooling 12-01-2019, 08:33 PM
Replies: 7
Views: 558
Posted By Corsair GregX
Hi! According to the layout of the Gigabyte...

Hi!

According to the layout of the Gigabyte TRX40 Aorus Xtreme you would need a case with 9 expansion slots in order to fit 4 GPUs with GPU water blocks.
Which case were you using?

Here is a...
Forum: Hydro X Custom Cooling (German) 11-28-2019, 01:29 PM
Replies: 1
Views: 420
Posted By Corsair GregX
Hallo, Ich würde Ihnen empfehlen, die...

Hallo,

Ich würde Ihnen empfehlen, die folgende Konfiguration zu überprüfen, die ich im Corsair Custom Cooling Configurator erstellt habe....
Forum: Hydro X Custom Cooling 11-27-2019, 07:41 PM
Replies: 4
Views: 474
Posted By Corsair GregX
Just a note about this kit. Included miter box is...

Just a note about this kit. Included miter box is made for 13mm OD tubing. Corsair Hardline tubing comes in 12mm aor 14mm OD.
Forum: Hydro X Custom Cooling 11-27-2019, 07:33 PM
Replies: 4
Views: 578
Posted By Corsair GregX
For acrylic tubing it's the best to go with fine...

For acrylic tubing it's the best to go with fine toothed hand saw. Then a silicone rod made for 10mm ID tubing, tube reamer and a heat gun.

A fine and quick guide.
https://youtu.be/g_qZjt4gi6I
Forum: Hydro X Custom Cooling 11-25-2019, 09:38 AM
Replies: 31
Views: 2,750
Posted By Corsair GregX
Looks really good, good job on your first...

Looks really good, good job on your first hardline build and thanks for sharing your impresisons on building with hardline tubing. Yes, Corsair Hardline tubing is acrylic.

Hope that your...
Showing results 1 to 25 of 191

 
Forum Jump

All times are GMT -4. The time now is 07:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.