The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   iCUE Software (https://forum.corsair.com/forums/forumdisplay.php?f=280)
-   -   Frustrated with ICUE not finding water cooler. (https://forum.corsair.com/forums/showthread.php?t=187012)

Jay2ayy 04-22-2019 09:53 PM

Frustrated with ICUE not finding water cooler.
 
I have the corsair h100i pro water cooler that I use with ICUE. When I first installed everything worked no problem. About a week later the water cooler was not showing up in ICUE, I did some trouble shooting and it showed up again. But this problem keeps happening over and over. The trouble shooting is not working this time I have uninstalled and reinstalled ICUE, it works and the water cooler shows again only to disappeared in about a week or so, or after an update. I cant keep uninstalling and reinstalling the soft ware, and spending all this time trying to fix this issue every time there is an update. The soft ware has worked very inconsistently. Is there a solution to this problem, or an alternative method I can use to control my water cooler. because as of right now there is no way for me to control the settings on the cooler. :mad:

DevBiker 04-22-2019 11:27 PM

Have you looked at that AIO FAQ (linked in my signature)? Look there where is references re-enabling the driver.

Are you running any other monitoring software? That is a common culprit of these issues.

Sacco Belmonte 04-23-2019 06:36 AM

Yep. Stuff like HWinfo will get the corsair driver invariably stuck.

DevBiker recently adviced us to disable CorsairAsetek support in HWinfo.

Just add

SupportCorsairAsetek=0

under the settings list in the HWinfo's INI file and save it before opening HWinfo again.

Kozmonaut 04-23-2019 02:43 PM

Quote:

Originally Posted by Sacco Belmonte (Post 1002274)
Yep. Stuff like HWinfo will get the corsair driver invariably stuck.

DevBiker recently adviced us to disable CorsairAsetek support in HWinfo.

Just add

SupportCorsairAsetek=0

under the settings list in the HWinfo's INI file and save it before opening HWinfo again.

I assume this isn't an issue when you're not actively running hwinfo right? My h115i plat isn't showing up and I shut basically every software that exists on my computer and it still doesn't show up yet in USB deview it's right there saying h115i connected.

Corsair Calico Jack 04-23-2019 04:50 PM

Quote:

Originally Posted by Kozmonaut (Post 1002321)
I assume this isn't an issue when you're not actively running hwinfo right? My h115i plat isn't showing up and I shut basically every software that exists on my computer and it still doesn't show up yet in USB deview it's right there saying h115i connected.

Sometimes it is, sometimes it isn't. I would suggest doing it anyways.

You can also try doing this: https://support.corsair.com/app/answ...id/77/kw/clean

Normally fixes it if it's a driver issue.

Sacco Belmonte 04-23-2019 05:26 PM

Quote:

I assume this isn't an issue when you're not actively running hwinfo right? My h115i plat isn't showing up and I shut basically every software that exists on my computer and it still doesn't show up yet in USB deview it's right there saying h115i connected.
Right. No HWinfo (or HWinfo with CorsairAsetek disabled) and have no problems. I leave my machine on 24/7 and I reboot once a week or so.

I didn't try again, but iCUE also exhibits problems if your CPU usage is 100% effectively leaving no CPU time for it.

What I also use is Process lasso to set permanent affinities on my 1800x and leave two cores on heavy rendering programs, that helps with literally everything (temps, stability, system snappiness)

Of course that's good on CPUs with 6 cores or more, which is where the industry is heading rapidly now.

Are you using some kind of USB hub in your system or are you going directly into an USB header? I use NZXT hubs (2 of them) and before I had another brand which showed the Corsair peripherals in the system but iCUE could not see them.

Kozmonaut 04-23-2019 07:31 PM

Quote:

Originally Posted by Sacco Belmonte (Post 1002351)
Right. No HWinfo (or HWinfo with CorsairAsetek disabled) and have no problems. I leave my machine on 24/7 and I reboot once a week or so.

I didn't try again, but iCUE also exhibits problems if your CPU usage is 100% effectively leaving no CPU time for it.

What I also use is Process lasso to set permanent affinities on my 1800x and leave two cores on heavy rendering programs, that helps with literally everything (temps, stability, system snappiness)

Of course that's good on CPUs with 6 cores or more, which is where the industry is heading rapidly now.

Are you using some kind of USB hub in your system or are you going directly into an USB header? I use NZXT hubs (2 of them) and before I had another brand which showed the Corsair peripherals in the system but iCUE could not see them.

Going directly into a USB header on my motherboard. Tried multiple cables and headers, all seems equally not working.

Sacco Belmonte 04-23-2019 07:48 PM

Hmm...that should work. Did you enable XHCI hand-off in your BIOS?

davejustdave 04-23-2019 08:05 PM

They said this would be repaired on the 4/22 update and here we are on 4/23 without so much as an update. Not cool. If it's delayed at least tell people. I left NZXT because of this sort of buggy software and lack of response.

Kozmonaut 04-23-2019 10:19 PM

Quote:

Originally Posted by Sacco Belmonte (Post 1002368)
Hmm...that should work. Did you enable XHCI hand-off in your BIOS?

I'm going to have to try that when I get home, one thing I have not.

Quote:

Originally Posted by davejustdave (Post 1002369)
They said this would be repaired on the 4/22 update and here we are on 4/23 without so much as an update. Not cool. If it's delayed at least tell people. I left NZXT because of this sort of buggy software and lack of response.

I agree. I sat here refreshing the update page for way too long then I'd like to admit yesterday, losing my mind a little bit.

Corsair CJ 04-23-2019 11:49 PM

Quote:

Originally Posted by davejustdave (Post 1002369)
They said this would be repaired on the 4/22 update and here we are on 4/23 without so much as an update. Not cool. If it's delayed at least tell people. I left NZXT because of this sort of buggy software and lack of response.

Quote:

Originally Posted by Kozmonaut (Post 1002376)
I'm going to have to try that when I get home, one thing I have not.



I agree. I sat here refreshing the update page for way too long then I'd like to admit yesterday, losing my mind a little bit.

Please see this post: http://forum.corsair.com/forums/show...&postcount=488

Kozmonaut 04-24-2019 01:23 AM

Quote:

Originally Posted by Corsair CJ (Post 1002381)

Hey! Thank you very much. Eager to see if this will fix my issues.

Edit: well it seems the disconnecting repeatedly has stopped so that I can keep icue open to manage my ram and keyboard, but the cooler still is nowhere to be found sadly.

BlaiseP 04-24-2019 12:38 PM

Quote:

Originally Posted by Kozmonaut (Post 1002390)
Hey! Thank you very much. Eager to see if this will fix my issues.

Edit: well it seems the disconnecting repeatedly has stopped so that I can keep icue open to manage my ram and keyboard, but the cooler still is nowhere to be found sadly.

Try a cold boot of your rig and see if the cooler shows up.

Kozmonaut 04-24-2019 12:45 PM

Quote:

Originally Posted by BlaiseP (Post 1002435)
Try a cold boot of your rig and see if the cooler shows up.

Cold boot?

Corsair Calico Jack 04-24-2019 05:12 PM

Quote:

Originally Posted by Kozmonaut (Post 1002437)
Cold boot?

He means do a full shutdown of the PC and then turn it back on.


All times are GMT -4. The time now is 05:57 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.