The Corsair User Forums

The Corsair User Forums (
-   Corsair Link (
-   -   Need Help ASAP! (

smithy1294 01-07-2013 11:27 AM

Yeh i have a matching id between the USB input device and the HID device, both with working drivers

EDIT: Just re-installed 2.2 and it no longer finds Hydro USB yet there still there in device manager working fine, going to try another reboot

Ripshod 01-07-2013 11:32 AM

If the cooler isn't listed in the software as Corsair H100i then you'll have to redo the flash in 2.1.1 cos 2.2.0 won't see it without the new firmware.

Should be done soon ( about 4 more posts lol)

smithy1294 01-07-2013 11:40 AM

Last time i was in 2.1.1 i couldnt see the h100i in the bootloader is was that just because windows couldnt find it?

Ripshod 01-07-2013 11:42 AM

Yes, cos it wasn't even installed.

And so it didn't flash.

smithy1294 01-07-2013 11:55 AM

No i mean i have no option to flash the h100i in 2.1.1 even now the device is installed (in windows) i have no option, the only option i have is the corsair commander :(

Ripshod 01-07-2013 11:59 AM

This is v wierd. We're about 80% there, just this to sort. Take a break, I am - hungry again lol.
If you want you could try 2.1.7 while I'm away, may not get you anywhere tho

smithy1294 01-07-2013 12:02 PM

i'll try the 2.1.7 and yeh you deserve a break, seriously cant believe you've put up with me this long :P

Ripshod 01-07-2013 12:08 PM

And I can't believe you've stuck it so long. If it was me this thing would be RMA'd already lol

smithy1294 01-07-2013 12:09 PM

Its not broken its just not working and i've only just fitted it :P

smithy1294 01-07-2013 12:18 PM

Right i have installed 2.1.7 and it still detects the Hydro USB, ran update FW an it lets me select h100i, i select the H100i_v1.0.4.s19 file and then it says bootloader in progress then seconds later ERROR loading FW file :@ it then lets me close it, i re-open corsair link and boom no Hydro USB, only way to get it back is too restart :@


Why won't it detect it, do i have to flash it to detect it?

Ripshod 01-07-2013 12:52 PM

mm, then I'd say you do have a USB conflict somewhere. Do you have USB3? Try in that with nothing else connected to the USB3? Have you tried with your keyboard/mouse on a different port?

Clutching at straws but it is a USB conflict. What's happening is the flash is starting, but the HID is dropping out during the process so it doesn't complete.

Are you using Windows' default USB2.0 drivers or drivers from your motherboard's manufacturer?

smithy1294 01-07-2013 12:57 PM

I have usb but how do i fit it into that its a different header isnt it? and how do you find out which usb 2 drivers your using?

Ripshod 01-07-2013 01:13 PM

If you haven't installed any USB drivers then you are using the Windows drivers. USB ports at the rear of your PC with a USB-A to mini USB-B lead (phone, or USB hub lead) or am I right recalling you saying you don't have one of those?

smithy1294 01-07-2013 01:27 PM

yeh i dont have one of these leads :(

Ripshod 01-07-2013 01:33 PM

For now you could just connect the fans to the fan headers on your mobo. Use speedfan to control them. We'll play a little more later lol.

Leave the pump connected to the cpu fan header so you're protected against pump failure.

All times are GMT -4. The time now is 11:20 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.