rtrski Posted June 10, 2015 Share Posted June 10, 2015 Do the 5 1/4 front drive cages remove, in whole or part? 4 is a bit much, considering most people will leave in the I/O bracket and have at most one optical drive. I'd like to us that room for something else if I consider this case. Link to comment Share on other sites More sharing options...
deees Posted June 10, 2015 Share Posted June 10, 2015 Not readily. It looks like there riveted in. Link to comment Share on other sites More sharing options...
rtrski Posted June 11, 2015 Author Share Posted June 11, 2015 Don't mind drilling out rivets if those bottom 3 detach from the 2 above...need to put a rez and pump there and leave the area between the mobo and 5 1/4 cages for something else. But if I have to hack the cage up too badly I'm better off considering a CaseLabs option (SMA8) for my overall wacky plan. Link to comment Share on other sites More sharing options...
Korg Posted June 30, 2015 Share Posted June 30, 2015 The entire 5.25 Bay must be drilled out. Almost 15 rivets. The I/O panel does not attach to it at all. I'm doing some customization to my 900D and chopped out the 5.25 cage, but the I/O bolts to the case frame itself (via 4 screws) so I can just put it back like usual. http://i.imgur.com/4kUnVao.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.