The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   Cases (https://forum.corsair.com/forums/forumdisplay.php?f=189)
-   -   Obsidian 500d RGB - Vertical GPU (3Slot) (https://forum.corsair.com/forums/showthread.php?t=194034)

mltlsk 02-16-2020 10:31 AM

Obsidian 500d RGB - Vertical GPU (3Slot)
 
Hi Folks,

i have just bought the 500d RGB and now i am thinking about placing my GPU vertical.
I own the Palit RTX 2080 Gamerock Premium, which is a 3Slot-Card.
I cannot find any information about this, so does anyone know if it fits?

thx & greetings from Hamburg <3

JonKrmr 02-16-2020 10:55 AM

The 500D Only has a two slot GPU space in it. Your three slot card will not fit as is without modifying the card to make it 2 slot.

mltlsk 02-16-2020 06:43 PM

ok, thx a lot :)

QuaZar-Kid 02-16-2020 11:05 PM

It looks like the back plate on that card is two slots but the body (chassis) takes up the "3rd slot" so to speak... is that correct ?

If that's the case it'll probably work just fine... I'd look up the width of the card in mm.
If you're removing the fan kit and Chassis and using the Hydro X you might be good to go

Krokarn 02-21-2020 07:11 AM

Quote:

Originally Posted by QuaZar-Kid (Post 1035250)
It looks like the back plate on that card is two slots but the body (chassis) takes up the "3rd slot" so to speak... is that correct ?

If that's the case it'll probably work just fine... I'd look up the width of the card in mm.
If you're removing the fan kit and Chassis and using the Hydro X you might be good to go

I have the 500D RGB SE case and have a 2080Ti Founders Edition in vertical mount and there is no space for a 3-slot GPU.

andyr(uk) 02-22-2020 06:47 AM

Hi , was thinking about doing the same with the gfx card , just wondered what length riser are you planning to use ?


All times are GMT -4. The time now is 02:18 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.