The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   Memory (https://forum.corsair.com/forums/forumdisplay.php?f=198)
-   -   Asus Rampage V Extreme + i7-5960x (https://forum.corsair.com/forums/showthread.php?t=193654)

Michelle_Br 01-30-2020 07:43 AM

Asus Rampage V Extreme + i7-5960x
 
I do not know, if it is allowed. *flush
My English isīnt so good. Thatīs why i posted my question into the German user-part of this forum.
https://forum.corsair.com/forums/sho...89#post1033289

But iīll try to discribe it in English, too. I think that there is more knowledge power here.*smiling
In the last few days i tried to make running this combination.
- Asus Rampage V Extreme
- i7-5960x
- HyperX Predator RGB 3200 (2x8GB)

But in two forums we could not find any solution. There seems to be Hynix JJR-Chips on the Rams. Up to 2.600MHz it is running well - but 2.666 and over that there were no solution.
Thatīs why i think iīve to give up.

Now my question.....
Do you think, that Corsair Vengeance LPX could be running with that x99 platform-combination at higher frequencies - ideal up to full-power 3.200?

Are there any experiences with it?

Thank you very much

Michelle

c-attack 01-30-2020 10:41 AM

2666 should be very easy on any memory kit on X99. You are losing a bit by running dual channel instead of quad channel, but that is another matter. I don't know if that specific Hyper X kit was developed for much later Z370 boards or something else that makes it different, but that is something you would need to ask them.

Ideally, you would like a quad channel Vengeance LPX kit. There may still be 4x4 kits out there. That is what I ran for several years on my X99. I ran 3200 easily on my X99 Pro and later X99 Strix. You may want to compare prices for 4x4 vs 4x8GB and assess how much you need.

Michelle_Br 01-30-2020 10:46 AM

Thank you very much for your answer. *smiling

That was my problem - the HyperX only runs up to 2.600 MHz - no more at 2.666 or faster .... we tried so much optional settings. No one could find a solution, why the Ram did not run faster. Thatīs why the only thinking was an incompatibility of the Ram-chips.

Did i understood you right - Corsair Vengeance LPX 4x8GB could run in 3.200MHz?
I read, that this type of Ram was especially made for the x99 platform, isīnt it?

c-attack 01-30-2020 11:49 AM

I think any RAM that lists 'as compatible' for X99 or X299 should work. Really, it all should work but there are a few odd kits out there made specifically for newer dual channel or AMD machines.

Yes, I think you can run 4x8@3200. Your board is good. If I could do it on the Strix, you should have no problem with RVE. However, I do think 3200 is the limit on X99 for daily use. Too much risk when trying to clock over that for so little in return.

Michelle_Br 01-30-2020 11:53 AM

3200 would enaugh for me .... *laughing

Thank you very much for your answer and your support.
:-)


All times are GMT -4. The time now is 09:15 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.