The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   Cooling (https://forum.corsair.com/forums/forumdisplay.php?f=155)
-   -   H100i PRO RGB and HD120 RGB LED (https://forum.corsair.com/forums/showthread.php?t=181798)

mets013 10-14-2018 06:08 AM

H100i PRO RGB and HD120 RGB LED
 
Hello! I was wondering if the mmH20 and the CFM on the HD120 RGB LED fans is enough for the hydro H100i PRO RGB radiator?

I've read that static pressure is important for fans on radiators but i couldn't find what mmH20 value that's "good".

Thanks!

c-attack 10-14-2018 06:39 AM

That’s because there isn’t a “good value” for static pressure. It is always rpm dependent and any comparison has to equalize speeds to be valid. More importantly, that static pressure value is the amount of negative pressure required to bring the fan from xxx rpm to zero. It is a potential measure of how a fan responds to resistance, not how much air it will move on a radiator or its cooling ability. I have a nice 2.8mm H2O fan, but its 40x40mm, runs 3800 rpm, and still only moves 9 cfm. Not what you want on a radiator. Airflow is still the determining factor.

The shorter answer is yes, the HD series is perfectly suitable as a radiator fan. There should be no difference in cooling performance between it and the ML-Quiet series. In fact, at higher speeds the HD likely puts more air through the radiator.

mets013 10-14-2018 07:24 AM

Okay I got it, Thank you!


All times are GMT -4. The time now is 04:26 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.