The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   iCUE Software (https://forum.corsair.com/forums/forumdisplay.php?f=280)
-   -   I have an issue about vengeance RGB pro (https://forum.corsair.com/forums/showthread.php?t=191408)

TDA1541 11-07-2019 12:11 PM

I have an issue about vengeance RGB pro
 
Hi Corsair,

My icue version is 3.21.88 and I have vengeance RGB pro Light Enhancement Kit*4 + vengeance RGB pro 8G*4

If I enable full software control there is two DIMM will lost light.::pirate::
https://i.imgur.com/THX3iNq.jpg

But when disable full software control will light normally.
https://imgur.com/T2cHMlb.jpg

PJH 11-08-2019 09:38 AM

Hey, hey!

Are the effects under Full Software Control applied to the DIMMs that are not lighting up?

When you flip between the two, the Lighting Effects are different and may need to be recreated/applied.

TDA1541 11-10-2019 11:20 AM

Ohh~
That's my negligence. Thanks your help.

But I still have other problem, I have enable "Start on system startup" then I will lost 4 lightning bar in iCue after PC power on. Restart iCue service can't fix this problem, only close iCUE.exe and run it again can fix.

Power on
https://i.imgur.com/TawrZg9.jpg

Close and run it again
https://imgur.com/rlty7vl.jpg


All times are GMT -4. The time now is 03:20 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.