The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   iCUE Software (https://forum.corsair.com/forums/forumdisplay.php?f=280)
-   -   Lighting Node Pro - LED Strips Predefined Effects always act as sequential (https://forum.corsair.com/forums/showthread.php?t=176161)

DemonRoxas 03-27-2018 03:38 PM

Lighting Node Pro - LED Strips Predefined Effects always act as sequential
 
With LINK, if I choose a predefined effect (for example "Color Wave") for all 4 strips, each strip acts as one and has its own wave going off at the same time (and I can control each strip's wave direction) .

With iCUE, if I choose this effect for all 4 strips, the wave goes through all 4 of them as if they are sequential. I can choose "left" or "right" as the direction for the whole flow, but I can't choose that for each individual strip anymore.

I can "uncouple" the wave into 4 seperate waves by having 4 layers of the custom "Wave" effect (each strip gets its own layer), but I can't change the direction of the custom "Wave".

If I create 4 layers of predefined "Color Wave" (one for each strip), they behave chaotically and don't sync up at all.

Some of my old LINK profiles need synced seperate waves with individual directions to achieve their visual effect. With iCUE, this is impossible.

Corsair James 03-27-2018 05:30 PM

If you assign each strip as a Color Wave layer (4 layers) and then restart iCUE, each layer will start simultaneously and you'll get the same effect.

Zotty 03-27-2018 05:37 PM

Quote:

Originally Posted by Corsair James (Post 946951)
restart iCUE, each layer will start simultaneously and you'll get the same effect.

Confirmed... or just switch to another profile and back again.

https://i.imgur.com/Mdq2X5hh.png

Corsair James 03-27-2018 07:48 PM

Thanks for confirming!


All times are GMT -4. The time now is 05:02 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.