HughHeff Posted August 17, 2018 Share Posted August 17, 2018 Hi, I am having an issue and looking for some guidance. I had 3 HD 120's before and all worked great with the fan hub and controller. Then I decided to connect all my lights and bought 1 more HD120 for my exhaust, RGB led strips and the commander pro. I have set everything up as it should be with my fan hub in RGB channel 2 and my LED strips in RGB channel 1. My RGB light strips work just fine. However, only the slot one fan is illuminating RGB. I switch all the fans to slot 1 and they all work just fine. I also, have another fan hub with the HD120 I bought and plugged it in place of the existing one. Same issue. Is there something I am missing? Any advice will help. Thanks! Link to comment Share on other sites More sharing options...
DevBiker Posted August 17, 2018 Share Posted August 17, 2018 Did you configure the channel for the correct number and type of fans? Link to comment Share on other sites More sharing options...
HughHeff Posted August 17, 2018 Author Share Posted August 17, 2018 Did you configure the channel for the correct number and type of fans? Yes. I put four, three in the front one in the back. I'm really not sure whats going on, the fans all illuminate so I know its not them, I've tried two fan hubs same results. I'm out of ideas. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.