The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   Corsair Link (https://forum.corsair.com/forums/forumdisplay.php?f=209)
-   -   Commander can't control Phantek? (https://forum.corsair.com/forums/showthread.php?t=165646)

Sineira 02-10-2017 03:13 AM

Commander can't control Phantek?
 
I have two Phanteks 140mm Case/Radiator Cooling Fan (PH-F140XP_BK) connected to a Commander Mini. The fans stay at 1100 rpm no matter what.
What do I do wrong??

red-ray 02-10-2017 04:50 AM

link to the fan specs and specify what you tried
 
1 Attachment(s)
Quote:

Originally Posted by Sineira (Post 890665)
What do I do wrong??

First you should have linked to the fan specs so I did not need find http://www.phanteks.com/PH-F140SP.html

Next can you control any fans and if so which ones? What about other 3-pin voltage fans?

As they are 3-pin voltage I am wondering if the CL Mini is detecting them as 4-pin PWM. The only easy way I know of to check would by for you to post the [Link Fans] panel from my SIV utility. If you hover over the mode value the tool tip will tell of if they were detected as 3-pin or 4-pin.

If you totally exit CL4 before starting SIV you could also see if SIV can change the fan speeds.

I recall one SIV user had fans that were not correctly detected, but can't remember the details.


Sineira 02-10-2017 07:39 PM

It seems the new version resolved it.


All times are GMT -4. The time now is 12:07 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.