The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   Keyboards and Mice (https://forum.corsair.com/forums/forumdisplay.php?f=214)
-   -   K55 RGB - update failed (https://forum.corsair.com/forums/showthread.php?t=168834)

Zantho 06-28-2017 11:21 AM

K55 RGB - update failed
 
I recently purchased this keyboard. The first time I connected the device to my computer worked well, the lights went on and I could use the effects combinations. But then I opened the CUE and asked me to update the firmware and it stopped working, it shows an "update error" message and the K55 image in the software dissapear.

The keypad is off and only flashing the white top-right lights.

I changed USB ports, uninstalled the drivers, but still not working.

Can I install the new firmware without the need for the CUE?

Greybeard 06-30-2017 02:53 PM

Try holding the FN + F4 while the KB is plugged in. The KB will flash then light up. Then try to flash the FW again via CUE.

Zantho 07-04-2017 10:20 AM

Quote:

Originally Posted by Greybeard (Post 910004)
Try holding the FN + F4 while the KB is plugged in. The KB will flash then light up. Then try to flash the FW again via CUE.

Not work yet.

But I conect the keyboard in another computer, and i can fix it.

The problem now is with te "rainbow" and "change/pulse color" effects...
the keyboard connect and disconnect every 10 seconds, only work in static mode

Greybeard 07-05-2017 03:06 PM

Have you done any updates on your USB drivers? It's probably related to your USB interface.


All times are GMT -4. The time now is 06:06 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.