The Corsair User Forums

The Corsair User Forums (https://forum.corsair.com/forums/index.php)
-   Corsair Link (https://forum.corsair.com/forums/forumdisplay.php?f=209)
-   -   H100i not dectected by Commander (https://forum.corsair.com/forums/showthread.php?t=121869)

theshadow 09-06-2013 12:53 AM

H100i not dectected by Commander
 
My H100i (FW 1.0.5) is detected in Link when directly connected to the motherboard. I wanted to attach it to the commander along with a cooling node but got a CPU fan error upon booting up my computer. I then upgraded the cooler FW to 1.0.7 and it got rid of the fan error but the H100i still isn't detected in the Link. I have already tried Link versions 2.3.4816 and 2.4.4948. The commander unit has FW 2.0.6.

Is there any new firmware or Link software? Is the CPU fan error indicative of a problem elsewhere?

Toasted 09-06-2013 06:29 AM

Have you tried a different port on the Commander unit?
Have you tried deleting your old profiles? (%Appdata%\Corsair)
Is the H100i's 3-pin connector connected to the CPU_FAN header on the motherboard?

theshadow 09-06-2013 10:56 PM

I tried another port on the Commander and got the CPU fan error again so it turns out that the first port wasn't working. I never created a profile as I just installed the new version of Link. I also had the 3-pin connector to the motherboard.

Anyway I called tech support and they suggested an RMA due to a hardware problem since they suggested I flash the firmware again but the problem remains. Thanks for the help anyway.

wytnyt 09-06-2013 11:38 PM

did you also check as toasted suggested
Is the H100i's 3-pin connector connected to the CPU_FAN header on the motherboard?
not properly hooked to this will cause this on boot


All times are GMT -4. The time now is 11:14 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.