The Corsair User Forums

The Corsair User Forums (
-   Solid State Drives (SSD) (
-   -   M.2 SSD Question (

bsanders03 09-03-2019 12:03 AM

M.2 SSD Question
I have the Asus Rog Crosshair VIII Hero Wifi motherboard.

I am looking at getting the Corsair Force Series MP600 1TB Gen4 PCIe X4 NVMe M.2 SSD.

Will this work with that board? And can I use 2 of these on that board? I am getting conflicting information as the website says it only has 1 - M.2 SLOT.

3rd Gen AMD Ryzen™ Processors :
1 x M.2_1 socket 3, with M Key, Type 2242/2260/2280 (PCIE 4.0 x4 and SATA modes) storage devices support

2nd Gen AMD Ryzen™/2nd and 1st Gen AMD Ryzen™ with Radeon™ Vega Graphics Processors :
1 x M.2_1 socket 3, with M key, type 2242/2260/2280 storage devices support (SATA & PCIE 3.0 x 4 mode)
AMD X570 chipset :
1 x M.2_2 socket 3, with M Key, Type 2242/2260/2280/22110(PCIE 4.0 x4 and SATA modes) storage devices support
8 x SATA 6Gb/s port(s),
Support Raid 0, 1, 10

THE RED PARTS is what I am looking at. Is this saying, there are 2 - m.2 spots?

If so, can I put 2 of those MP600 M.2's in those slots?

Rimc_LT 09-03-2019 12:53 PM

Yes You can but I suggest to wait because were is problems whit speed on this SSD. Wait and see if new firmware will fix this problem if not search alternatives (i have this drive and have problem whit it (not only me) on same motherboard).

hyperwolf 09-03-2019 03:17 PM

Not everybody have problem with speed using this new generation of disk but keep in mind that connected on a PCIe 3.0 you will get only 3 500 and 3 000 - not full read/write speed.

Jordan_ 09-04-2019 04:55 AM

check out this
I wont even even wait to see if they gonna fix it or not
I would go with GIGABYTE AORUS NVMe Gen4

bsanders03 09-04-2019 05:51 AM

Is this the best one out there? The GIGABYTE AORUS NVMe Gen4

Jordan_ 09-04-2019 05:55 AM

for now yes at least no one complain about performance drop to 1000MB/s once it filled 60% with data!

bsanders03 09-04-2019 05:57 AM

Doesn't Samsung make one? are they good?

All times are GMT -4. The time now is 10:05 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.