Carovie

please inform about the final result

take a look to this thread candeh: https://forum.corsair.com/forums/showthread.php?t=155922

thank you very much for the info redp800, this could be very useful

In my case, long time waiting for a H150i (360 mm) platinum, but it seems it will not be real

I totally agree with both of you and I have exactly the same questions with these headsets. I hope they soon can fix about the level of the battery while is charging and too to show it on the main screen of the headsets. It doesnot have sense to have to go into the configuration screen to see it

understood, thank you very much again for your reply DevBiker When I watch and read the most I can in iCUE page ad in your signature, if still I had some doubt, I open a new specific thread Thanks again

thanks again DevBiker, but I don't understand the relation of this that you told me with the fact that I can't have one lighting link in ST100 and another different in headsets and neither the possibilitie of pulse on the icon of the eye to calncel there this effect Do you know if exists a tutorial for rookies or anything where I can read and know about how to use and the possibilities of iCUE? Because I think I started by the end and I am pretty lost and have a big mental mess with this software and how to use it because I don't know even the easiest and like that is impossible to me have anything clear and only I ask and ask Thanks for your help again

Thank you very much for your reply and help again DeviBiker As you can see in the two pictures that I attach, I only had one more question about this In this first picture I show how in ST100 device, on the left of the screen, inside "lighting effects", I have what you told me yesterday, "lighting link", where I can pulse on the eye and disable the effect https://ibb.co/1Ljsjfy But in the screen of the headsets, I don't have anything inside "lighting effects", and I don't understand why this is different https://ibb.co/TmFVTkv Thanks for all you help again

Thanks for your reply and your screen capture DevBiker, but I dont' have in my iCUE anything similar to this of your screen capture, please check EDIT: I don't know to post here directly the screen captures or it doesnot work fine for me, I put link to them https://ibb.co/9Zq4QSG https://ibb.co/N1Hdry9

anybody could help me with this, my last doubt? ""The only thing that I can't find on iCUE of your last message is this: "if you don't want the effect on a specific device, you can turn it off by clicking the icon at the very left of the effect in the effects list. It'll change to an "eye" with a line through it. That disables the effect for the channel." I can't find in the screen this icon to do this. I see "Instant Lighting", where I can turn off all lighting by selecting black colour, but no the other option Thanks again for all your help""

really thank you very much again for your messages and help DevBiker About the profiles, I have to read and study a lot, because I don't know yet about what is their use or purpose. I think that they "only" are for have all devices synchronized with very good and spectacular ilumination effects, but I dont know how to load one of this profiles and their possibilities I have to check too the FAQ link in your signature The only thing that I can't find on iCUE of your last message is this: "if you don't want the effect on a specific device, you can turn it off by clicking the icon at the very left of the effect in the effects list. It'll change to an "eye" with a line through it. That disables the effect for the channel." I can't find in the screen this icon to do this. I see "Instant Lighting", where I can turn off all lighting by selecting black colour, but no the other option Thanks again for all your help

really thank you for your replies and your help DevBiker If you allow me, I would like to comment/ask you a couple of questions more for I can have all my doubts solved Understood, I see, Lighting Link is one of the columns with the ilumination options in each device. For example in headsets I see predetermined and Lighting Link and in ST100 I see predetermined, personalized and Lighting Link I see too that Lightning Link "works" for all devices at the same time, but what would happen if I want one of the Lighting Link effects in headsets (for example rainbow) and another different effect from the Lighting Link in ST100 (for example rain), at the same time? This is not possible? About the "No effect" that appears in headsets but not in ST100, then if for example I have selected rainbow effect in the ST100, how can I turn off the effects on it if I don't have available the option of "No effect" like in headsets? I have one last and important question if anybody could explain me or write me some link where I can read about it, what for are exactly te profiles that can be created? What it is their use? Is it easy to create one? Really thanks for all your help

Thanks for your reply DevBiker I understand now why the effects are differents in both devices but I still have some doubts about the synchronization of both devices. What is a Lighting Link effect? Is not possible, if for example I have red colour (or rainbow or any other effect) in the headsets, to pulse a botton and have the same effect in all the rest of the devices? And is possible to have for example rainbow in headsets and rain in ST100? I don't understand neither why I have "without effect" in headsets and I don't have it in ST100. This is neccesary to turn off the ilumination in ST100, right? As you can see, I have some doubts abut the performance of iCUE with the devices Thanks for all your help

Hello Excuse my english Although I have iCUE software installed some weeks ago, yesterday was my first use seriously because I started to use a Void Pro RGB Wireless headsets and the ST100 Both devices are perfectly recognized by the software but I have some doubts: Do I need to create a profile? Which is the use of to create a new profile? Where can I read about how to do it? How can I to synchronize the ilumination of both devices (and which more in the future) pressing only one botton or in a easy way? Why both devices don't have exactly the same type of iluminations? For example in headsets I see breathing and beat and they arenot in ST100 and in ST100 I see Ripple and Gradual and they are not in headsets. And more important, in headsets I see "Without effect", but it is not in ST100 Thanks in advance for your help

perfectly understood, thanks for all your comments and help Waukeen