disocpete
-
Posts
30 -
Joined
-
OK I get you. I've got a Hyper 212 in there now so the backplate I'm familiar with and can access the bskc of the mobo. OK thankyou for all the confirmations.
-
Also another stupid question... Do these come pre filled with coolant? So I just have to do the bracket, apply some paste, screw it down? I have never had nor installed an aio before
-
So this one? https://www.amazon.co.uk/dp/B077G3C6HH/ref=cm_sw_r_cp_apa_i_SqJ6EbH51KV9K
-
I'll go for the h115i I think. I don't have multi colour rgb (which might be a waste) and go for solid colours so different fan types/lighting aren't much of an issue. I can always swap out the HD fans down the line and go all ML to achieve a consistent effect. Now onto cheapest seller. Amazon is OK. Ideas for sellers welcome https://www.amazon.co.uk/dp/B07JWB5BSP/ref=cm_sw_r_cp_apa_i_BDG6EbDRAEGAD
-
Follow up question Can I plug the aio into the commander Pro and control via icue?
-
OK I'd light some rgb fans as long as they don't conflict with my hd120s as I read you can't mix fan types.... But eith it's own controller connected to the commander Pro should it be fine?
-
i7 6700k socket 1151 Corsair Air 540 case so plenty of room Commander Pro installed 3 x HD120 fans already in system +1 140mm non rgb fan for exhaust. Budget £100-£120 I'm looking for suggestions for a corsair aio that will best "fit" my system. in best fit, i mean given what i already have installled, size of case...whats best? Like the Corsair iCUE H100i PRO XT RGB Liquid CPU Cooler (i like RGB) but wondered what else is out there that might work better/look better/better suit system?
-
Are the bottom (of case) SATA adapters always hot swap in these cases? I fear killing something
-
Is this the right tray? https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F402031834486
-
Which is the best cooler for the following I7 6700k 4.2ghz Air 540 case (happy to mount either way) CoPro installed I have 3 hd120 rgb fans already Needs to be RGB budget is £50-£100 Post your suggestions.
-
thanks man
-
I need a 3.5/2.5 hdd tray for the main bay (base fitting) where the sata hotswaps are. Also need some rubber adhesive feet to raise the case off the desk more Anyone know the part number or where I can get one? Tried the trays from my old case but they're too tall.
-
Sorted the issue by getting a carbide air 540 instead (£20 second hand) and I'm all built.
-
*correction* Carbine 400c I have now sorry
-
thanks i like the Obsidian 500d more than the crystal series. but its the whole other section in the 680x that appeals, not hugely in to showing off and tonnes of RGB. THe 680x seems overkill due to what i already have. A cheaper variant which is just the case minus the the LNPro and fans would be ideal for me but only eBay will provide such a thing I'm sure. £200 on a case is a lot which is why i hesitate + already owning the CoPro etc takes the shine off a brand new 680x