Jump to content

Robbie_Jardine

Members
  • Posts

    56
  • Joined

Reputation

11 Good

About Robbie_Jardine

  • Birthday 06/01/1982

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. In June 2023 I experienced an issue with my LC100 triangles as they suddenly stopped lighting up despite showing up in iCue. They were replaced the same month, however I have a repeat of the same issue. Around the same time I started to notice and issue where the fans connected to the Commander Pro (device included with Obsidian 1000D) randomly stop showing up in iCue, they come back when the service is restarted via iCue but then randomly vanish again. I also have random USB device restarts that knockout my USB devices for a few minutes. The LC100's were plugged into the lighting channel on the Commander Pro, so I'm unsure if the Commander Pro has developed a fault which has then impacted the LC100's. The problem I have is that I bought the Obsidian 1000D soon after release and no longer have the receipt, so I am unsure if I'm covered under warranty for an RMA replacement. The LC100's will still be covered as under a year but how many times can I RMA these? Any help would be appreciated.
  2. I'm on my second set after having them replaced in June and less that six months later they are dead again. They show up in iCue but they don't light up. I moved them from the Commander Pro to the Lighting Node Pro to see it that helped but nope. Kinda frustrating as I was about to buy the Corsair GPU Anti-Sag bracket. There seems to be a theme here with Corsair's RGB products as 3 of my LL120 fan's are acting strange. 1 fan has LED's on, moving in the middle but not outer ring, 1x is showing 4 colours in the middle and nothing on the outer ring and 1x has no LED's on at all. iCue is correctly configured and they are all wired correctly in my tower.
  3. Anyone have the corsair icue logo gif that comes preloaded? It the one where the colours spark.
  4. I have been having this issue for a while and I don't think it's caused by iCue as during my research those who are having the same issue are not running iCue or have any corsair products. It appears to be caused by an issue with the Intel Chipset Drivers, may be a bug in the XHCI controller driver and there doesn't seem to be a fix. I also experience the issue on a clean Windows installation with nothing but OEM drivers installed.
  5. It's oddly still not possible to lock Dashboard items in place so that when you minimise and maximise the window all dashboard items remain in place as configured. Almost 12 months since I submitted this suggestion and still not implemented.
  6. I wonder if it's because I have 12 Corsair devices connected and therefor I have a higher number of 'modules' installed. At the moment CPU usage hovers between 6.5% and 13% with 676.5MB of memory in use, I have the app open and idle.
  7. This new version needs some refinements, it's currently using a lot of system resources, a lot more than v4.
  8. Hopefully we'll see more than a few minor bug fixes and start seeing more features and improvements across the app. I'd love to see it integrating better in Windows 11, i.e. snap layouts ect.
  9. An update with no fixes or enhancements in changelog 🤔
  10. I have a few suggestions that are the top of my Wishlist: Improved widget sensors I have an Nvidia GeForce RTX 3080 and while iCue correctly shows the CPU core temp, it shows another 2 temp zones I assume are memory and VRM's temps but these are higher than reported by Precision X1 (see screenshot). Improved Dashboard I have my Dashboard configured the way i like it, I have it showing CPU, Mobo, AIO, PSU, Case and Memory but as soon as I minimise and maximise iCue all widgets are jumbled. There should be way to pin widgets to a specific are in the app so that iCue remembers widget placement when the app is minimised and maximised. I would also like to see the ability to rename widgets as this would remove ... from long hardware names as is the case with my motherboard. Support for Ultrawide Displays I have a Samsung Odyssey G9 and I put it to good use and for the most part iCue shows all my peripherals and widgets across the width of the screen. Everything become inconsistent if I click on specific peripherals, Fans, lighting etc is aligned to the left. Mouse mat, mouse, headset etc are aligned to the middle of the screen. We should have the ability to move items about or resize items where appropriate. Support for Windows 11 Snap Layouts. As with my ultrawide display I like to align two windows side by side depending on what I am doing, so I use snap layouts most of the time but this is not supported with iCue which is very frustrating.
  11. So what does this supposedly cancelled update fix exactly? 7enhancements listed and not a mention of fixes anywhere. Make me wonder why we waited over a month for this.
  12. Not seeing 4.25 myself. 4 24 was released in May so I'm hoping for an extensive list of fixes including one for the memory leak that gobbles around 20GB and for high CPU usage.
  13. Is there any way to pin Dashboard items in iCue? In its current state I can rearrange each UI elements in a position I want including temps, fans and voltages, however iCue always forgets my customisations whenever i minimise or shrink the app or when I reboot my system. It's very annoying. Dashboard One thing to also note is that there appears to be an issue with my 1000D Commander Pro as it seems to think there are more than my 6 fans connected to it. Restarting the iCue service may fix it temporarily but the issue comes back.
  14. Does Corsair test updates for iCue before they are released? I updated to 4.11.274 and it's still pointless to customise the dashboard as it still doesn't remember your settings when minimising and maximising the app, To make things worse sensors can no longer be moved around, previously I had all sensors aligned by device type i.e. fans, temps, voltages etc. and now they can't be moved. it's like 2 steps forward and a million back. How about fixing issues without killing existing functionality??
×
×
  • Create New...